YAMAHA YST-SW1500
¥ 105,000 (1 unit, released in December 2002)
Commentary
An active subwoofer developed as a flagship model.
The unit is equipped with 30 cm cone type woofer.
This unit uses a dual-bias magnetic circuit, in which two pairs of opposing magnets provide uniform and cooperative magnetic flux density.
In addition, an aluminum die cast frame is used for the frame.
QD-Bass technology is adopted.
In this system, the woofer unit is installed downward and a pyramidal diffuser plate is installed on the bottom to efficiently radiate low-temperature energy in four horizontal directions. This realizes smooth frequency characteristics and free setting regardless of installation location.
The enclosure uses the Advanced Yamaha Active Serve Technology (A-YST) system.
Based on the concept of an air woofer that uses air itself as a diaphragm, the A-YST system enables low-frequency playback equivalent to that of a large speaker even in a small enclosure.
The exterior has a cherry finish.
The amplifier section is equipped with a 1 kw high-efficiency power amplifier.
Also, a high-efficiency power source is used for the power supply.
Equipped with LFE input.
Equipped with an auto standby function.
Equipped with a B. A. S. S. mode switch.
Movie/Music can be switched, and low sound playback is possible depending on the source.
Equipped with a phase selector switch.
Wireless remote controller with 3-position memory function is included.
Model Rating
Method | Built-in Amplifier / 1-Way / 1-Speaker / A-YST System / Floor Type / Anti-magnetic Design |
Units Used | For low band : 30 cm cone type |
Playback frequency band | 16 Hz to 160 Hz -10dB |
Rated output | 1000W (5 Ω) |
Input | Line : RCA Pin Speaker : L/R |
High-cut filter | 40 Hz ~ 140 Hz Continuously Variable |
Power consumption | 185W |
External dimensions | Width 420x Height 511x Depth 448 mm |
Weight | 29.0kg |
Attachment | 2 x 4m speaker cables RCA pin plug cable (3m) Remote control Vibration-proof pad |