YAMAHA K-500
¥ 54,800 (around 1982)
Commentary
In addition to the Pure Sendust head and logic control circuit, a stereo cassette deck newly adopted Dolby C Type NR.
Pure Sendust head of low impedance design is used for recording and re-recording head.
This head uses high-purity Sendust molded by Yamaha's high-vacuum centrifugal casting method as the core material. By improving the saturation magnetic flux density, the input / output characteristics at high frequencies are greatly improved.
The mechanism uses a two motor separate drive system, and the flywheel has an outer diameter of 59 mm and a moment of inertia of about 1000g ・ cm.2By adopting a large flywheel, stable running is achieved.
Equipped with a Dolby C type noise reduction system.
The recording amplifier uses an operational amplifier to enable recording with a wide dynamic range. The playback equalizer uses a 2-stage direct-coupled amplifier with a low-noise transistor at the first stage, and the headphone amplifier uses a circuit with a high-output operational amplifier.
It uses feather touch full logic control which realizes quick response, Rec standby, Rec mute, etc.
Equipped with 2-color 12-dot LED peak meter.
Remote operation is also possible with the optional wired remote control unit.
Model Rating
Type | Cassette deck |
Tape speed (deviation) | 4.75cm/sec + / - 1 per cent |
Wow flutter | 0.05% or Less (JIS-WRMS) |
Fast forward and rewind time | 90sec(C-60) |
Recording and reproducing frequency characteristics | LH (-20VU) : 40 Hz to 16 kHz ± 3 dB CrO2 (-20VU) : 40 Hz to 18 kHz ± 3 dB Metal (-20VU) : 40 Hz to 20 kHz ± 3 dB (0 VU) : 40 Hz to 13 kHz ± 3 dB |
Overall signal-to-noise ratio | 73 dB (dolby C in, CrO2 Tape) |
Overall strain rate | Not more than 1% |
Channel separation | 35dB |
Input Sensitivity / Impedance | Mic : 0.4mV/3.9k Ω Line : 60mV/60k Ω |
Output Level / Impedance | Line : 350mV/1.5k Ω Phones : 0.6mW/8 Ω |
Attachment mechanism | Dolby B/C NR Auto tape selector 2-color 12-point peak LED with peak hold Universal headphone amplifier Repeat switch Rec Mute Memory Stop Balanced volume Timer recording switch |
Pwer | 100 VAC, 50/60Hz |
Power consumption | 18W |
External dimensions | Width 435x Height 112x Depth 278 mm |
Weight | 4.5kg |
Sold Separately | Remote Control Unit RS-10 (¥ 6,000) |