YAMAHA RX-V10mk2

Commentary

DSP AV amplifier which is the successor of RX-V10.

Equipped with 5.1 ch external input terminals, you can enjoy Dolby Digital by connecting to a DVD player with a built-in Dolby Digital Decoder.

Equipped with on-screen function, you can operate while watching the monitor screen.

Equipped with 6 types of surround programs that can be enjoyed even in movies, music videos and CDs.

Discrete configuration is used for the amplifier circuit.

Built-in FM/AM tuner for AM stereo.
Equipped with FM auto-preset function and 40-station preset function.

You can connect three AM devices and three audio devices.

Built-in functions such as sleep timer.

By combining the separately sold Dolby digital / cinema DSP processor DDP-10, you can enjoy 3 sound field cinema DSPs.

It comes with a wireless remote controller that can operate Yamaha components.

Model Rating

Type	DSP AV Amplifier
<Audio section>
Rated output	Main : 50W + 50W (6 ohm, 20 hz to 20 khz, THD 0.04%) Center : 45W (8 Ω, 1 khz, THD 0.04%) Rear : 15W + 15W (8 ohm, 1 khz, 0.3% THD)
Maximum practical power	Main : 80W + 80W (6 ohm, 1 khz, 10% THD) Center : 80W (6 Ω, 1 kHz, 10% THD) Rear : 25W + 25W (6 ohm, 1 khz, 10% THD)
Dynamic Power (IHF)	70W + 70W (8 Ω) 85W + 85W (6 Ω) 95W + 95W (4 Ω) 110W + 110W (2 Ω)
Input Sensitivity / Impedance	Phono MM : 2.5mV/47k Ω DVD/LD, VCR, Tape/MD, CD, V-Aux : 150mV/47k Ω 6ch Main L/R : 150mV/70k Ω Center : 150mV/70k Ω Rear L/R : 90mV/40k Ω Subwoofer : 150mV/40k Ω
Maximum Allowable Input (THD 0.5%)	Phono MM:100mV
Output Voltage / Impedance	Rec out : 150mV/0.9k Ω Subwoofer : 3.5V/1.6k Ω
Headphone Output / Impedance	0.45V/330 Ω (RL = 8 Ω)
Frequency characteristic	DVD/LD, VCR, Tape/MD, CD, V-Aux : 20 Hz to 20 kHz ± 0.5 dB
Total harmonic distortion factor	Phono MM (1 v) -Rec out (1 v) : 0.02% (20 Hz to 20 kHz) DVD/LD, VCR, Tape/MD, CD, V-Aux-Main SP out (22.5W, 8 Ω) : 0.02%
S/N ratio (IHF-A network, input short)	Phono MM:82dB(5mV) DVD/LD, VCR, Tape/MD, CD, V-Aux : 95 dB
Residual Noise (IHF-A Network)	140 μ V
Channel Separation (Vol. max)	Phono MM : 60 dB (input short, 1kHz/10kHz) DVD/LD, VCR, Tape/MD, CD, V-Axu : 60 dB (input 5.1k Ω short, 1 kHz)
Tone control	Treble : ± 10 dB (20 kHz) Turnover frequency : 3.5 kHz Bass : ± 10 dB (50 Hz) Turnover frequency : 350 Hz
Tracking Error (0 to -60dB)	3dB
<Video Part>
Video level	1Vp-p/75 Ω
Maximum allowable input	1.5Vp-p
Signal-to-noise ratio	50dB
Frequency characteristic	5 hz to 10 mhz -3dB
FM Tuner Section
Receiving sensitivity	76.0 mhz to 90.0 mhz
50 dB S/N sensitivity (IHF, 75 Ω)	Mono : 1.6 μ V (15.3 dBf) Stereo : 23 μ V (38.5 dBf)
Effective selectivity	75 dB (± 400 kHz)
Signal-to-noise ratio (IHF)	mono:80dB stereo:75dB
Distortion Factor (1 kHz)	mono:0.1% stereo:0.2%
Stereo separation	48dB(1kHz)
Frequency characteristic	30 Hz to 15 kHz ± 1 dB
<AM Tuner Section>
Receiving frequency	531 to 1611 kHz
Practical sensitivity	300 μ V/m
Signal-to-noise ratio	50dB
<Tuner audio section>
Output Level / Impedance	FM : 500 mV (100% modulation, 1 kHz) AM : 150 mV Ω (30% modulation, 1 kHz)
<General>
Power outlet	Switched : 2 systems, Total100Wmax
Pwer	100 VAC, 50Hz/60Hz
Power consumption	160W
External dimensions	Width 280x Height 119x Depth 389 mm
Weight	7.3kg
Attachment	Remote control FM simple antenna AM loop antenna
Surround Mode	Cinema DSP program Pro Logic Pro Logic Enhanced HiFi DSP program Concert Video Mono Movie Rock Concert Concert Hall