YAMAHA CR-500
Price unknown (around 1971)
Commentary
A stereo receiver developed using Yamaha's latest technology.
A low-noise FET is used for the front end of the tuner section, a solid state filter with high stability and no misalignment is used for the IF amplifier section, and a high-gain monolithic IC with a differential amplifier is used for the IF circuit.
The MPX circuit uses a transistor switching method unique to Yamaha.
Equipped with a muting circuit.
It is equipped with a loudness switch.
Equipped with a selector switch for the preamp and main amplifier.
Equipped with a microphone mixing circuit.
Model Rating
| Type | Stereo receiver |
| <Audio section> | |
| Dynamic Power | 60W (IHF, 1 kHz) |
| Rated output | 22W/22W(1kHz) |
| Harmonic distortion factor | 0.05% (1 kHz, 35W) |
| IM distortion factor | 0.1% (70 Hz : 7 kHz = 4 : 1, 20W) |
| Power band wiz | 18 Hz to 46 kHz (0.5% distortion, IHF) |
| Channel separation | 50dB(1kHz) |
| FM Tuner Section | |
| Receiving sensitivity | 2.0 μ V |
| Harmonic distortion factor | mono:0.3% stereo:0.5% |
| Signal-to-noise ratio | 70dB |
| Effective selectivity | 70dB(1kHz) |
| Capture ratio | 1.5dB(1kHz) |
| Image interference ratio | 55dB |
| Stereo separation | 40dB |
| <AM Tuner Section> | |
| Receiving sensitivity | 20 μ V |
| Image interference ratio | 40dB |
| Effective selectivity | 25dB |
| <General> | |
| Power supply voltage | 100 VAC, 50Hz/60Hz |
| Power consumption | 120W |
| External dimensions | Width 420x Height 140x Depth 300 mm |
| Weight | 9kg |