VICTOR/JVC MCT-V5
¥ 30,000 (around 1973)
Commentary
FM/AM tuner developed based on low cost / high quality design philosophy.
The front-end section is composed of 1 FET, 2 silicon transistors and 3 variable capacitor.
In addition, IF5-stage amplification and two ceramic filters with four elements provide excellent FM reception.
It is equipped with an FM muting switch that can cut unpleasant inter-station noise.
In addition, the MPX-Hi-BLEND switch is installed to prevent high-frequency noise that occurs when stereo reception is performed in a location with poor reception conditions.
It is equipped with an adapter terminal in anticipation of FM discrete 4 ch broadcasting.
Model Rating
| Type | FM/AM Tuner |
| FM Tuner Section | |
| Receiving frequency range | 76 MHz to 90 MHz |
| Sensitivity | Up to 2.0 μ V (IHF) |
| Total harmonic distortion factor | mono:0.3% stereo:0.6% |
| S/N | 65dB |
| Effective selectivity | 50dB |
| Capture ratio | 2.5dB |
| Image interference ratio | 55dB |
| IF interference ratio | 85dB |
| Spurious interference ratio | 85dB |
| Stereo separation | 35 dB or More (1 kHz) |
| AM suppression ratio | 45dB |
| Subcarrier suppression ratio | 50dB |
| SCA carrier suppression ratio | 55dB |
| Muting level | 22 μ V |
| Antenna input impedance | 300 Ω equilibrium 75 Ω unbalance |
| Output signal level (400 Hz, 100% modulation) | Variable Output : 1.2 V Fixed output : 0.4 V Detection output : 100 mV |
| <AM Tuner Section> | |
| Receiving frequency range | 535 kHz to 1605 kHz |
| Sensitivity (IHF) | 20 μ V |
| Selectivity | 25dB |
| S/N | 50dB |
| Image interference ratio | 35dB |
| IF interference ratio | 45dB |
| Output signal level (400 Hz, 100% modulation) | Variable Output : 1.0 V Fixed output : 0.4 V |
| <General> | |
| Semiconductor used | Transistor : 19 Diode, etc. : 24 pcs |
| Power supply voltage | 100 VAC, 50Hz/60Hz |
| Power consumption | 13W |
| External dimensions | Width 380x Height 125x Depth 303 mm |
| Weight | 5.8kg |