Audio Database
SC-800
Commentary

This is a stereo set with enhanced musical performance by using a cellular horn in the middle range.


Receiver section

In addition to the ITL-OTL circuit, the amplifier section is an OCL circuit without the output capacitor, which realizes direct connection between the amplifier and the speaker, and improves low-frequency distortion, frequency characteristics and damping characteristics.

A full-scale IC is used for the equalizer circuit of the preamplifier section to realize a circuit resistant to noise.

As a control function, it is equipped with circuits such as loudness control and high filter.

The preamp section and main amplifier section can be used independently.

A 4-pole MOS type FET is used for the FM tuner section, and excellent sensitivity and selectivity are ensured by using a 4-stage IF circuit.

Switching system is adopted for FM multi-circuit.

Equipped with FM-AM tuning meter.


Player part

The tone arm uses a pipe arm with an inside four scan seller.

The cartridge is a semiconductor cartridge.


Speaker part

3-way configuration.

Equipped with a multi-sellerhorn type squaker in the mid-range, the mid-range playback capability is enhanced.
It has a 20 cm cone woofer in the low range and a 6.5 cm cone tweeter in the high range.

The enclosure is hermetically sealed.


Other

There was an interior box as an option sold separately in SC-800. This interior box was also sold as SC-800 Deluxe as a set.
The interior box can be used as a record shelf or tape deck storage rack.

It can be developed into a multi-amplifier system by adding a multi-channel divider (sold separately).

Model Rating
Type Stereo system
Amplifier Unit
Circuit system OTL-ITL-OCL with IC
Output (Music Power) 36W (EIA Standard)
Power band wiz 10 Hz to 40 kHz
Signal-to-noise ratio 60dB
Channel level control Bass-Treble
Accessory function Headphone jack
Tape monitor
Loudness switch
Aux input
Din connector
Pin terminal
Pre out-Main in connector
Tuner Section
Receiving frequency FM 76 MHz to 90 MHz
AM 525 kHz to 1,605 kHz
Receiving sensitivity FM 4 μ V (IHF)
AM 20 μ V (IHF)
FM multi-circuit Switching system
Accessory function AV/FM external antenna terminal
Tuning meter
<Player Part>
<Turntable portion>
Drive system Rim drive system
Drive motor 4 Pole
Turntable 30cm
Cartridge Section
Cartridge Semi-conductor
Needle pressure 3.0g
Exchange needle EPC-24STSD (Diamond Needle)
Tone Arm Section
Tone arm Static balance system
Accessory function Auto return
Inside for scan seller
Speaker Unit
Method 3-Way, 3-Speaker, Airtight System, Floor Type
Units Used Low band 20 cm corn mold
For Middle Range Horn type
High pass 6.5 cm cone type
<General>
Frequency characteristic 28 Hz to 20 kHz
Semiconductor used Transistor : 28
Diode : 31 Units
Pwer 100 VAC, 50Hz/60Hz
Power consumption 60W
External dimensions Width 1,460x Height 689x Depth 364 mm
Weight 49kg
Sold Separately Channel Divider with Main Amplifier SU-200D (¥ 33,000)
Sold Separately : Interior Box SH-800B (¥ 13,000)
External dimensions Width 487x Height 689x360mm