* The tape deck is sold separately.

Commentary

A stereo set designed to balance performance.

---

Receiver section

The SEPP-OTL circuit is used for the amplifier.

The preamp section and main amplifier section can be used independently.

A 4-pole MOS FET is used for the FM tuner section.

Equipped with FM-AM tuning meter stereo eye.

---

Player part

The cartridge is a semiconductor cartridge.

---

Speaker part

3-way configuration.

A 20 cm cone type woofer is installed in the low range.
In addition, it is equipped with a 9 cm cone scoker for the middle range and a 6.5 cm cone tweeter for the high range.

The enclosure is hermetically sealed.

---

Other

There was an interior box as an option sold separately in SC-725. This interior box was also sold as SC-725 Deluxe as a set.
The interior box can be used as a record shelf or tape deck storage rack.

It can be developed into a multi-amplifier system by adding a multi-channel divider (sold separately).

Model Rating

Type		Stereo system
Amplifier Unit
Circuit system		SEPP-OTL
Output (Music Power)		22W (EIA Standard)
Accessory function		Loudness switch
Tuner Section
-		-
<Player Part>
<Turntable portion>
Turntable		30cm
Cartridge Section
Cartridge		Semi-conductor
Needle pressure		3.5g (Diamond Needle Used)
Tone Arm Section
Tone arm		-
Speaker Unit
Method		3-Way, 3-Speaker, Airtight System, Floor Type
Units Used	Low band	20 cm corn mold
	For Middle Range	9 cm cone type
	High pass	6.5 cm cone type
<General>
External dimensions		Width 1,540x Height 594x Depth 364 mm
Weight		41kg
Sold Separately		Channel Divider with Main Amplifier SU-200D (¥ 33,000)
Sold Separately : Interior Box SH-725B (¥ 10,000)
External dimensions		Width 480x Height 594x359mm