* The tape deck is sold separately.

Commentary

A low-boy type separate stereo designed with an emphasis on the FM tuner section.

---

Receiver section

The amplifier is an all-solid-state design using silicon transistors.
The SEPP-OTL circuit system is used.

A complete print base has been realized.

A 4-pole MOS FET is used in the FM tuner section.
The circuit structure is composed of IF4-stage and 2-stage direct-coupled limiter circuits, ensuring excellent sensitivity even in areas with FM hearing loss.
Equipped with a tuning meter and stereo eye.

---

Player part

A rim drive system using a 4-pole motor is adopted as the drive system.

The cartridge is a semiconductor cartridge.
The characteristics are improved by driving with a unique vertical drive system.

Equipped with auto functions such as auto return.

---

Speaker part

3-way system is adopted.

A 20 cm cone type woofer is installed in the low range.
The mid-range is equipped with a 9 cm cone scoker and the high-range is equipped with a 6.5 cm cone tweeter.

---

Other

The speaker is equipped with screws for height adjustment.

In SC-720M, there was an interior box as an option sold separately. This interior box was also sold as SC-720M Deluxe as a set.
The interior box can be used as a record shelf or tape deck storage rack.

Model Rating

Type		Stereo system
Amplifier Unit
Output		44W(P.M.P.O)
Channel level control		Bass-Treble
Accessory function		Headphone jack Loudness switch Din connector Read / write pin terminal
Tuner Section
Receiving frequency	FM	76 MHz to 90 MHz
	AM	525 kHz to 1,605 kHz
Receiving sensitivity	FM	3 μ V (IHF)
	AM	10 μ V (IHF)
FM multi-circuit		Switching system
Accessory function		FM external antenna terminal Tuning meter Stereo eye
<Player Part>
Drive system		Rim drive system
Drive motor		4-pole motor
Number of revolutions		33 1/3, 45 rpm
Turntable		30cm
Cartridge		Semi-conductor
Needle pressure		3g
Exchange needle		EPS-11STSD (Diamond)
Tone arm		Channel arm (lateral balancer)
Accessory function		Auto return Autocut Autosleep
Speaker Unit
Method		3-Way, 3-Speaker, Airtight System, Floor Type
Units Used	Low band	20 cm corn mold
	For Middle Range	9 cm cone type
	High pass	6.5 cm cone type
<General>
Frequency characteristic		30 Hz to 20 kHz
Semiconductor used		Transistor : 25 Diode : 19 units
Pwer		100 VAC, 50Hz/60Hz
Power consumption		35W (maximum output)
External dimensions		Width 1,540x Height 604x Depth 365 mm
Weight		-
Sold Separately : Interior Box SH-720B (¥ 9,500)
External dimensions		Width 480x Height 604x365mm