Technics SL-Q300
¥ 49,800 (released in 1983)
Commentary
Quartz D. D. full auto player with emphasis on basic performance and operation performance.
Quartz is used for rotation control, and by making full use of unique all-around detection F. G. and electronic circuit technology, rotation accuracy within ± 0.002% rotational speed deviation has been achieved.
In addition, a unique integrated structure D. D. turntable is adopted.
Straight pipe tone arm is adopted, and high-sensitivity gimbal suspension system is adopted for the bearing structure.
Equipped with a plug-in connector type MM cartridge.
Equipped with a full automatic mechanism, it starts playing just by setting the number of revolutions and pressing the start button.
All operation buttons are laid out on the front of the cabinet so that all operations can be performed while the dust cover is closed.
The upper and lower cabinets and bottom base are all made of TNRC with excellent vibration absorption.
Model Rating
Type | Quartz DD full auto player system |
<Turntable portion> | |
Drive system | Direct drive |
Drive motor | Brushless DC motor |
Control system | Quartz control |
Turntable | 31.2 cm Aluminum Die-cast |
Number of revolutions | 33 1/3, 45 rpm |
Wow flutter | 0.025%W.R.M.S(JIS C5521) 0.012% W. R. M. S (Rotating Part Only) |
Signal-to-noise ratio | 78 dB (DIN-B, IEC98A weighted) |
Tone Arm Section | |
Rotational axis sensitivity | 7 mg (horizontal and vertical initial motion sensitivity) |
Needle pressure adjustment range | 1.0g ~ 1.5g |
Applicable Cartridge Weight | 6g |
Cartridge Section | |
Format | Plug In Connector MM Type Cartridge |
Dead weight | 6g |
Exchange needle | EPS-30ES(¥6,000) |
<General> | |
Pwer | 100 VAC, 50Hz/60Hz |
Power consumption | 5W |
External dimensions | Width 430x Height 100x Depth 375 mm |
Weight | 4.5kg |