Technics SL-55
¥ 42,800 (around 1974)
Commentary
A record player that pursues cost-performance.
The drive section uses a direct drive system using an ultra-low speed electronic commutator motor.
The speed change can be adjusted by 33 1/3 or 45 rpm independently by 10%.
The needle pressure application mechanism is 0 balanced, and the needle pressure adjustment is a simple rack opinion type.
The tone arm uses a die-cast high-sensitivity S-shaped pipe arm.
Equipped with an oil dump type arm lifter.
We have adopted a MM type cartridge using a newly developed magnet.
The legs have built-in audio insulators.
You can add a plus arm.
Model Rating
Type | Direct drive player |
Turntable | 30 cm Aluminum Die-cast |
Motor | Ultra-low speed electronic commutator motor |
Number of revolutions | 33 1/3, 45 rpm |
Rotational speed fine adjustment range | 10% |
Wow and flutter | 0.03%(W.R.M.S.) |
Signal-to-noise ratio | 60dB(IEC-B) |
Tone arm | Universal S-shaped Pipe Arm Needle pressure direct reading type Anti-skating force control device With Queuing |
Needle pressure adjustment range | 0 ~ 4g, Variable Direct Reading in 0.5g Units |
Applicable Cartridge Weight | 4.5g ~ 11.5g |
Cartridge | MM Type |
Exchange needle | EPS-270DD(¥5,500) |
Power consumption | 4W |
External dimensions | Width 485x Height 180x Depth 383 mm |
Weight | 7.8kg |