Technics SL-5350

Commentary

Direct drive auto-changer with quartz phase locked control.

To select single multi-play, you only need to replace the center spindle, and it is designed so that you can enjoy manual play, 1 ~ 6 times and R (repeat) memo gram, and multi-play up to 6 records.

By using the provided auto / manual spindle, you can enjoy manual play.
This is a combination type that does not require automatic or manual switching. If you use an oil dump type queuing lever, you can cue up a song in the middle. Even in manual play, the Oatley turn mechanism works and the arm automatically returns to rest.

In auto-play mode, if you set the number of revolutions and record size, you only need to operate the start / stop lever. The auto-start, auto-stop, and Oatley turn operate. It also comes with a memo gram that allows you to set 1-6 times and R (repeat) continuous performances.

If you use the spindle for auto-changer, you can enjoy multi-play of up to 6 records. If you set the memogram according to the number of records, you can play up to 6 records continuously. If you set the memogram to the R position, you can enjoy repeated playing of the last record.
The center spindle used for the auto-changer is an umbrella type spindle developed by Technics, and the dust cover can be closed even when the auto-changer spindle is used.

Uses a double vibration isolation structure made of TNRC, an acoustic material with excellent vibration damping and absorption characteristics.

Phase control by quartz oscillation achieves rotational speed deviation of ± 0.002%.
In addition, high-precision detection signals have been obtained by using an all-around detection F. G for rotational speed detection.

The bearing structure of the tone arm employs a gimbal suspension system in which the axes of the horizontal and vertical rotation axes intersect at a point.

Equipped with MM cartridge.

Equipped with a stylus illuminator.

Model Rating

Type	Quartz phase locked control Direct drive autochanger
<Turntable portion>
Drive system	Direct drive
Drive motor	Brushless DC motor
Control system	Quartz phase locked control
Turntable	30.4 cm Aluminum Die-cast
Number of revolutions	33 1/3, 45 rpm
Rotational speed fine adjustment range	+ / - 6 per cent
Starting torque	1.0 kg / cm
Start-up characteristic	Constant speed at 0.7 seconds (at 33 1/3rpm)
Load variation	0.9 kg / cm or Less 0% (at Quartz Lock)
Rotational speed deviation	± 0.002% or Less (at Quartz Lock)
Wow and flutter	0.025%W.R.M.S(JIS C5521)
Signal-to-noise ratio	78dB(IEC98A weighted)
Tone Arm Section
Format	Universal S-shaped Static balance Gimbal suspension system
Rotational axis sensitivity	7 mg (horizontal and vertical initial motion sensitivity)
Needle pressure adjustment range	0 ~ 2.5g
Shell Weight	7.5g
Applicable Cartridge Weight	6g ~ 9.5g 3g ~ 6.5g (When Using Shell Weight)
Cartridge Section
Type	MM Type Stereo Cartridge
Dead weight	6.0g
Exchange needle	EPS-270SD (round needle, ¥ 2,800) EPS-270ED (Elliptical Needle, ¥ 5,500)
<General>
Pwer	100 VAC, 50Hz/60Hz
Power consumption	8.5W
External dimensions	Width 430x Height 180x Depth 375 mm
Weight	7.3kg