Technics SL-25
¥ 26,800 (around 1972)
¥ 31,800 (around 1974)
Commentary
Belt drive player capable of auto return and cutting in the middle.
30 cm aluminum die-cast turntable is adopted.
Auto return / intermediate cut is possible by operating the lever.
It uses a low-capacity cord and supports CD-4 playback.
Uses a removable dust cover.
Model Rating
Type | Belt drive player system |
Arm Turntable Part | |
Turntable | 30 cm Aluminum Die-cast |
Motor | 4-pole synchronous motor |
Number of revolutions | 33 1/3, 45 rpm |
Wow flutter | 0.1% or less (W. R. M.S.) |
Signal-to-noise ratio | 47 dB or more |
Format | Universal J-shaped Pipe Arm Static balance type With Inside Force Canceller |
Cartridge Section | |
Format | Moving Magnet Type |
Product Number | EPC-86SM(Technics 280C) |
Frequency characteristic | 20 Hz to 25 kHz |
Output voltage | 3mV/ch (50mm/s, horizontal, 1 khz) |
Channel separation | 25 dB or More (1 kHz) |
Channel balance | Within 2 dB (1 kHz) |
Compliance | 8x10-6cm/dyne(100Hz) |
Proper needle pressure range | 2g ~ 2.5g |
Needle tip | 0.5 mil diamond needle |
Mounting Dimensions | JIS, EIA |
Output terminal | 1.2 φ 4-pin terminal |
Replacement Needle Product Number | EPS-52STDD(¥3,500) |
<General> | |
Pwer | 100 VAC, 50Hz/60Hz |
Power consumption | 14W |
External dimensions | Width 440x Height 179x Depth 350 mm |
Weight | 7kg |