Audio Database

SL-1350
Commentary

This direct drive auto-changer was developed by taking advantage of many years of overseas auto-changer technology as well as development technology of direct drive.

By using a special spindle, up to 6 pieces of LP, EP, or doughnut can be played continuously.
If the manual spindle is used, full auto player operation such as auto start / Oatley turn / memo repeat / intermediate cut is possible.

The auto-start mechanism allows the needle tip to be gently lowered into the groove for the record of the set size only by operating the lever. You can enjoy playing the record without worrying about the arm operation at the start of playing the record.
In addition, SL-1350 is equipped with a memo repeat mechanism of 1 to 5 times.

The motor uses a unique D. D motor with an integrated structure. In addition, the rotating part of the motor is integrated with the turntable and the fixed part is integrated with the case. There is no need to stack the case, motor, and turntable, thus improving performance and reliability.

Model Rating
Type Direct drive autochanger
Turntable 33 cm Aluminum Die-cast
Motor Ultra-low speed electronic commutator motor
Number of revolutions 33 1/3, 45 rpm
Rotational frequency switching system Electronic control system
Rotational speed adjustment range 10%, each rotation speed independently adjustable
Wow flutter 0.04% (W. R. M.S., JIS / C5221)
Signal-to-noise ratio 58dB(IEC179B)
70dB(DIN45539B)
Bootup Normal operation at 1/2 rotation (33 1/3rpm)
Tone arm Universal S-shaped Pipe Arm
Needle Pressure Direct Reading Type, Static Balance Type
Gimbal suspension system
Anti-skating force control device
With Oil Dump Type Queuing
Needle pressure adjustment range 0 ~ 3g, Direct Reading Variable
Applicable Cartridge Weight 5g ~ 11g
Pwer 100 VAC, 50Hz/60Hz
Power consumption 4W
External dimensions Width 453x Height 199x Depth 366 mm
Weight 10.5kg