Technics SL-1200
¥ 59,800 (released in 1972)
¥ 65,800 (around 1974)
Commentary
This direct drive player system was developed as the prototype of the SL-1200 series which has been produced for more than 30 years.
The drive section employs an electronically controlled ultra-low-speed DC motor of the same specifications as the SL-1100. This eliminates the influence of power supply voltage and frequency fluctuations and provides stable rotation.
310 kg ・ cm due to large starting torque2The turntable is rotated at a constant speed of 1/2 rotation, and quick start is also possible by stopping the turntable by hand and starting it instantly.
Excellent performance is obtained by direct drive system without any reduction mechanism such as belt and idler.
A strobe is engraved on the edge of 45 ° inclination, and the rotation speed can be finely adjusted accurately by illumination of the illuminator.
Speed switching is electronic, and fine adjustment is possible within 10% range by 33 1/3 and 45 rpm alone.
A large dynamically balanced turntable 33 cm in diameter and 1.75 kg in weight has been adopted.
The tone arm uses a precision die-cast S-shaped pipe arm.
Uses a one touch rack-and-pinion type for 0 balance and needle pressure adjustment.
Anti-skating force control can be performed simply by setting the knob according to the needle pressure.
Equipped with an oil dump type arm lifter.
Universal head shell of gold-plated terminal is adopted to prevent contact failure.
Equipped with an insulator to prevent external vibration.
A low-capacity cord is used to support CD-4.
Dust cover is included.
Model Rating
Type | Direct drive player system |
<Turntable portion> | |
Turntable | 33 cm Aluminum Die-cast, 1.75 kg |
Inertial mass | 310 kg / cm2 |
Motor | Ultra-low speed electronic commutator motor |
Number of revolutions | 33 1/3, 45 rpm |
Rotational frequency switching system | Electronic control system |
Rotational speed adjustment range | ± 5%, each rotation speed independently adjustable |
Wow flutter | 0.03%(W.R.M.S.) |
Signal-to-noise ratio | 60dB(IEC-B) 70dB(DIN45539B) |
Bootup | Normal operation at 1/2 rotation (33 1/3rpm) |
Tone Arm Section | |
Format | Universal S-shaped Pipe Arm Needle Pressure Direct Reading Type, Static Balance Type With Anti-Skating Force Control With Oil Dump Type Queuing |
Needle pressure adjustment range | 0 ~ 4g |
Applicable Cartridge Weight | 4.5g ~ 11.5g |
<General> | |
Case | Built-in die-cast audio insulator |
Pwer | 100 VAC, 50Hz/60Hz |
Power consumption | 4.0W |
External dimensions | Width 453x Height 180x Depth 366 mm |
Weight | 10kg |