Technics SL-1000mk3D
¥ 650,000 (released in 1983)
Commentary
This is a player system that is the highest level of Technics Player, using the best parts carefully selected from the needle tip to the base.
In addition to turntable SP-10mk3 and turntable base SH-10B5, dedicated straight pipe tone arm straight pipe tone arm and MM type cartridge EPC-P100Cmk4.
With a starting torque of 16 kg-cm, a 10 kg-heavy turntable can be rotated for 0.25 seconds at a constant rotation angle of 30 ° and an inertial mass of 1.1 ton-cm.2Rotation speed fluctuation does not occur even for load torque of 10 kg ・ cm.
Quartz D. D. provides excellent rotational performance with rotational speed deviation of ± 0.001%.
Fine speed adjustment in 0.1% increments up to ± 9.9% is possible.
Equipped with a straight-tone arm that uses the world's first Boron Titanium Tapered Pipe, it acquires ideal mechanical strength and mass distribution, and completely suppresses harmful partial resonance due to bending and twisting.
It is equipped with a plug-in connector type MM cartridge EPC-P100Cmk4. It acquires an extremely small effective mass of 0.055 mg and realizes wide-band playback from 5 Hz to 120 kHz.
The turntable base is integrally molded with TNRC, a unique acoustic material, and anti-vibration measures are thoroughly taken.
Dust cover is included.
Model Rating
| Type | Quartz synthesizer D. D. player system |
| <Turntable portion> | |
| Drive system | Direct drive |
| Drive motor | Brushless DC motor |
| Control system | Quartz control |
| Turntable (Including Rubber Sheet) | 32 cm copper alloy + aluminum die-cast, 10 kg |
| Number of revolutions | 33 1/3, 45, 78.26 rpm |
| Fine adjustment of rotational speed | ± 9.9% (0.1% step) |
| Starting torque | 16 kg / cm |
| Starting Characteristics (33 1/3rpm) | Constant speed at 0.25 seconds |
| Brake mechanism | Electronic brake Mechanical brake |
| Load variation | 10 kg / cm or less 0% |
| Rotational speed deviation | Within ± 0.001% |
| Wow flutter | 0.015%W.R.M.S(JIS C5521) |
| Signal-to-noise ratio | 92dB DIN-B(IEC 98A weighted) 60dB DIN-A(IEC 98A unweighted) |
| Tone Arm Section | |
| Format | Dynamic damping system tone arm Gimbal suspension system |
| Rotational axis sensitivity | 5 mg (horizontal and vertical initial motion sensitivity) |
| Needle pressure adjustment range | 1.25g Adjusted |
| Applicable Cartridge Weight | 6g |
| Applicable Cartridge Compliance | 12x10-6Cm / dyne (dynamic, 100 Hz) |
| <General> | |
| Pwer | 100 VAC, 50Hz/60Hz |
| Power consumption | 25W |
| External dimensions | Body : Width 561x Height 175x Depth 466 mm Control unit : 166 mm wide x 96 mm high x 410 mm deep |
| Weight | 44.0kg |
| Remarks | Technics Cartridge Compliance Mix compliance display. 25x10 at other companies-6Values of cm/dyne or higher are displayed For static compliance indication, approximately The value of 1/2 is equivalent to dynamic compliance. |