Technics RS-1500U(U-38)
¥ 244,000 (around 1976)
Commentary
Stereo tape deck with isolated loop system.
The mechanism uses an isolated loop system with one capstan and two pinch rollers. This system realizes a closed loop system, isolating the contact path of the head from the rotation of the reel base, and eliminating the adverse effects of fluctuations in tape tension.
The capstan uses a direct drive system with quartz lock control. The capstan has a diameter of 34 mm and is highly accurate.
It uses a strobe with LED lighting, and speed deviation in seconds can be visually checked.
Equipped with 3-stage bias switch and 3-stage equalizer switch.
The head section consists of four heads. The tape path is arranged in the order of four track playback, two track erasure, two track recording, and two track playback.
It uses a reel stand direct drive that can fast-forward and rewind at almost constant speed from beginning to end.
Equipped with a cue lever.
The level meter uses a double-scale system.
Equipped with tape pitch control, it can be adjusted within ± 6%.
Equipped with a timer standby mechanism.
It is equipped with a microphone amplifier with a 77 dB dynamic margin for real live recording.
DC drive is possible with optional battery case and 40 single dry batteries. Approximately 2 hours of continuous recording is possible when using Neo High Top dry batteries.
Rack joint for 19 inch standard rack, dust cover, wood case and portable case were sold separately.
Model Rating
Type | Stereo tape deck |
Track format | 2-track 2-channel recording / playback 4-track 2-channel playback |
Head configuration | For Recording : High Hardness Permalloy For Regeneration : High Hardness Permalloy x2 For Erase : Double Gap Ferrite |
Motor used | One quartz-lock electronic commutator DD motor Two electronic commutator DD motors |
Tape speed | 38cm/s, 19cm/s, 9.5cm/s |
Frequency characteristic | 38cm/s : 30 Hz to 30 kHz ± 3 dB |
Signal-to-noise ratio | 60dB(JIS) |
Wow flutter | 38cm/s:0.018%(WRMS) |
Input Sensitivity / Impedance | Mic : 0.25 mV (-72dB) / 400 Ω ~ 20k Ω Line in:60mV(-24dB) |
Output Level / Impedance | Line out : 420 mv (-7.5 db) / 22k Ω or more Headphone:60mV |
Semiconductor used | Transistor : 248 units IC : 10 Diode : 75 pcs Other Semiconductors : 7 Pieces |
Pwer | 100 VAC, 50Hz/60Hz DC24V |
Power consumption | 55W |
External dimensions | Width 456x Height 443x Depth 257 mm |
Weight | Approx. 23 kg |
Sold Separately | Head Block RP-2224 (¥ 38,000) Head Block RP-2422 (¥ 38,000) Head Block RP-2224SX (¥ 58,000) Head Block RP-2422SX (¥ 58,000) Portable Case RP-9100 (¥ 35,000) Dust Cover RP-9110 (¥ 5,000) Wood Case RP 9120 (2 Sheets 1 Set, ¥ 5,000) Rack Joint RP 9130 (2 Sheets 1 Set, ¥ 2,000) Battery Case RP-099 (¥ 30,000) Battery Adapter RP-086 (¥ 30,000) Remote Control Box RP-9690 (¥ 13,000) Remote Control Box RP-9170 (¥ 18,000) Wireless Remote Control Unit RP 070 (¥ 30,000) |