Technics SH-S100

Commentary

AV selector with volume and wireless remote control.

The audio input is equipped with a Line 5 of CD, aux, tape, DAT and ext. The AV input is also equipped with a Line 5 of TV/tuner, BS, VDP, VTR1 and VTR2. Up to five tape decks including a VCR can be connected.

For the video system, dedicated S-VHS terminals with more than 400 horizontal resolutions are installed in the input Route 3 and the output Route 3.

Audio and AV input / recording selectors are independent.

The built-in volume allows you to control the volume of each device in the system in a centralized manner.

Equipped with a BGV function that allows you to monitor the video while the audio source is playing.

Equipped with a muting function.

Equipped with a balance volume.

You can switch between mono and stereo modes.

Wireless remote control is included.
This remote control includes power ON/OFF, muting, volume UP/DOWN, REC selector switch, BGV selector switch, audio selector, video selector, etc.

Since the SH-S100 is not a preamp, the volume may be insufficient when directly connected to a power amplifier.

Model Rating

Type	AV selector
<Audio section>
Frequency characteristic	CD, aux, tape, DAT, TV/tuner, BS, VDP/CDV, VTR1/2 : 0.8 Hz to 150 kHz + 0 -3dB 20 Hz ~ 20 kHz + 0 -0.2 dB
Input Sensitivity / Impedance	CD, aux, tape, DAT, TV/tuner, BS, VDP/CDV, VTR1/2 : 15mA/22k Ω
Rated output voltage	150mV
Maximum allowable input	7V
<Composite Video Part>
Rated input level / impedance	TV/tuner, BS, VDP/CDV, VTR1/2 : 1Vp-p/75 Ω
Rated output level / impedance	TVout, VTR1/2 out : 1Vp-p/75 Ω
<S-Video Part>
Rated input level / impedance	VDP/CDV, VTR1/2 Luminance signal : 1Vp-p/75 Ω Color difference signal : 0.285Vp-p/75 Ω
Rated output level / impedance	VTR1, TVout Luminance signal : 1Vp-p/75 Ω Color difference signal : 0.285Vp-p/75 Ω
<Others>
Pwer	100 VAC, 50Hz/60Hz
Power consumption	11W
External dimensions	Width 430x Height 103x Depth 287 mm
Weight	4.1kg
Attachment	Wireless Remote Control EUR64769