Technics SH-8045
¥ 26,800 (around 1983)
Commentary
Stereo graphic equalizer with 12 independent left and right sections.
Continuous control within ± 12 dB is possible at 12 center frequencies for each channel.
For more subtle control, the variable range switch allows the variation to be selected to ± 3 dB.
Low distortion and high SN are achieved by band-pass filter using semiconductor inductor.
Equipped with an equalizer position switch that enables equalization during tape recording.
Equipped with an equalizer on/off switch to easily check the equalization effect.
Equipped with a tape monitor switch.
Model Rating
| Type | Stereo graphic equalizer |
| Frequency characteristic | 5 Hz to 100 kHz -1dB |
| Maximum output voltage | 8 v (1 kHz, 0.01% THD) |
| Rated output voltage | 1V |
| Total harmonic distortion factor | 0.005% (20 Hz to 20 kHz) |
| Input sensitivity | 1V |
| Signal-to-noise ratio (IHF-A) | 110dB |
| Maximum Input Voltage | 8V(1kHz) |
| Input impedance | 47k Ω |
| Gain | 0 ± 1 dB |
| Band level control | ± 12 dB, ± 3 dB (12 elements, continuously variable) |
| Center frequency | 16 Hz, 31.5 Hz, 63 Hz, 125 Hz, 250 Hz, 500 Hz 1 kHz, 2 kHz, 4 kHz, 8 kHz, 16 kHz, 32 kHz |
| Pwer | 100 VAC, 50Hz/60Hz |
| Power consumption | 12W |
| External dimensions | Width 430x Height 53x Depth 235 mm |
| Weight | 2.6kg |