Audio Database

SA-222
Commentary

FM/AM stereo tuner amplifier that combines a 30W + 30W amplifier and a quartz synthesizer tuner.

The tuner section uses a quartz synthesizer system with an emphasis on waveform transmission characteristics. The front end consists of an electronic tuning circuit with a proprietary IC and a junction FET to improve the IM interference ratio rejection capability.
By using three ceramic filters in the IF stage, high selectivity and low distortion factor have been obtained.

Excellent sound quality is obtained by setting the reference frequency to 25 kHz, which is outside the audio band.

A unique swallow in counter system eliminates spurious interference from within the broadcast band.

7-station FM/AM preset is available.
In addition, it is equipped with functions such as auto-scan / manual switching and last one memory.

The amplifier section has a simple circuit configuration of two ICs and one transistor.

Low distortion and low noise design using IC is adopted for the equalizer.

Equipped with two types of tape terminals.

Equipped with a subsonic filter.
The tone control is a center defeat type.

Equipped with an FM muting switch.

Model Rating
Type FM/AM Receiver
Amplifier Unit
Effective power 30W + 30W (8 Ω, 20 Hz to 20 kHz)
Total harmonic distortion factor 0.04% (20 Hz to 20 kHz at Rated Output)
Damping factor 30 (8 Ω)
Input Sensitivity / Impedance Phono : 2.5mV/47k Ω
Tuner, Aux/TV, Tape : 150mV22k Ω
Signal-to-noise ratio Phono:80dB
Frequency characteristic Phono : RIAA standard curve ± 0.8 dB
Tuner, Aux/TV, Tape : 5 hz to 70 khz -3dB
Tone control Bass : ± 10 dB (50 Hz)
Treble : ± 10 dB (20 kHz)
Load impedance Main or remote : 4 Ω ~ 16 Ω
Main + remote : 8 Ω ~ 16 Ω
FM Tuner Section
Receiving frequency 76.1 mhz to 89.9 mhz
Practical Sensitivity (75 Ω) 10.8 dBf (1.9 μ V, IHF' 58)
SN ratio 50 dB sensitivity Stereo : 38.3 dBf (45 μ V, IHF' 58)
Distortion factor mono:0.15%
Signal-to-noise ratio mono:75dB
Frequency characteristic 20 Hz to 15 kHz + 1-2 dB
Effective selectivity 70dB
Capture ratio 1.2dB
Image interference ratio 60dB(83MHz)
IF interference ratio 80dB(83MHz)
Spurious interference ratio 80dB(83MHz)
AM suppression ratio 55dB
Stereo separation 45dB(1kHz)
Antenna terminal 75 Ω Unbalanced Type
<AM Tuner Section>
Receiving frequency 522 kHz to 1611 kHz
Practical sensitivity 30 μ V, 300 μ V/m
Selectivity 55dB
Image interference ratio 50dB(999kHz)
IF interference ratio 40dB(999kHz)
<General>
Pwer 100 VAC, 50Hz/60Hz
Power consumption 98W
External dimensions Width 430x Height 120x Depth 300 mm
Weight 6.5kg