TRIO KT-3300
¥ 25,500 (around 1975)
¥ 27,000 (after price revision, around 1975)
Commentary
FM/AM tuner with phase linear 4-element filter.
The high-frequency stage uses a junction FET with low noise and good linearity, a 3-FM3 frequency linear variable capacitor, and an integrated molded coil sealed with resin to obtain excellent reception characteristics.
The IF stage employs a phase linear 4-element filter, high-density IC, wide-band quadrature detection, etc. to obtain excellent phase characteristics and stability.
The MPX section uses a PLL circuit that is stable and resistant to changes over time.
By adopting a large 60 φ flywheel and making the minimum necessary pulley and dial wire as short as possible, accurate tuning without backlash is possible.
In addition, a 200 mm long dial scale is adopted.
Equipped with auto FM muting, radio waves with an excellent SN ratio above the muting level are received in stereo, and weak radio waves are received in monaural Hi-Fi.
Equipped with FM stereo indicator.
There was a wood case sold separately.
Model Rating
Type | FM/AM Tuner |
FM Tuner Section | |
Receiving frequency | 76 MHz to 90 MHz |
Antenna impedance | 300 Ω equilibrium 75 Ω unbalance |
Sensitivity (IHF) | 1.9 μ V |
Chinese arrowhead's slope | 50 dB (5 μ V) 56 dB (10 μ V) 65 dB (50 μ V) |
Distortion Factor (400 Hz, 100% modulation) | mono:0.2% stereo:0.4% |
Image ratio | 60dB |
Selectivity (IHF) | 60dB |
IF interference ratio | 90dB |
Harmonic spurious response | 75dB |
AM suppression ratio | 50db |
Capture ratio | 1.0dB |
Stereo separation | 30dB(400Hz) 30 dB (50 Hz to 10 kHz) |
Carrier leakage | 40dB |
Frequency characteristic | 30 Hz to 15 kHz + 0.2 -2.0 dB |
<AM Tuner Section> | |
Receiving frequency | 525 kHz to 1605 kHz |
Sensitivity (IHF) | 20 μ V |
Distortion factor | 0.9% |
Signal-to-noise ratio (30% modulation, 1 mv input) | 50dB |
Image ratio | 45dB |
Selectivity (IHF standard) | 35dB |
<General> | |
Output Level / Impedance (400 Hz) | FM (100% modulation) : 0.15V/5.6k Ω AM (30% modulation) : 0.7V/5.6k Ω |
Power supply voltage | 100 VAC / 117 V, 50Hz/60Hz |
Rated power consumption (Electrical Appliance and Material Control Law) | 10W |
External dimensions | Width 380x Height 140x Depth 255 mm |
Weight | 5.3kg |
Sold Separately | Wood Case SRA-3000 (¥ 4,500) |