Audio Database

KT-3050
Commentary

FM/AM tuner that achieves both excellent operability and sound quality.

It is equipped with an active reception circuit that automatically switches between stereo and mono / IF bands according to the radio wave condition and always receives in the optimum condition.
When the reception condition is good, set the IF band to Wide for sound quality. When sensitivity and selectivity are important, set the IF band to Narrow.

The front end uses a direct linear reception circuit (DLRC) to improve reception accuracy over the entire band.

Uses a 2-stage switching IF band selector, and selectivity can be improved by switching the IF band selector.

In the MPX section, sufficient separation is obtained by switching circuit in both wide and narrow modes.
In addition, it has a high sound quality design that realizes low output impedance (600 Ω).

In addition to the random preset memory function which can preset up to 39 FM and AM stations at random, it is equipped with a station name function which can register up to the broadcasting station name.
Once you memory the broadcasting station and write the station name, you can check the broadcasting station not only by the frequency but also by alphabet.

Equipped with a 3-row 5-point signal meter that can grasp reception status.

Equipped with shuttle type tuning dial with excellent operability.

Auto/Manual 2-step tuning mode can be switched.

It comes with a 25-key full remote control that can operate remote control power ON/OFF and preset scan tuning function by remote control.

Model Rating
Type Stereo synthesizer FM/AM tuner
FM Tuner Section
Receiving frequency range 76 MHz to 90 MHz
Sensitivity (75 Ω) Mono : 0.95 μ V/10.8 dBf
Harmonic distortion factor (Wide, 1 kHz) mono:0.04%
stereo:0.08%
SN ratio (100% modulation, 85 dBf input) mono:82dB
stereo:77dB
Effective selectivity (IHF) Wide:55dB
Stereo Separation (1 kHz) Wide:82dB
Frequency characteristic 30 Hz ~ 15 kHz + 0.5 -1.5 dB
Image interference ratio 90dB
<AM Tuner Section>
Receiving frequency 531 kHz to 1602 kHz
Sensitivity 15 μ V / 400 μ V/m
Signal-to-noise ratio 50dB
Harmonic distortion factor (999 kHz) 0.3%
Effective selectivity 30dB
<General>
Power supply voltage 100 VAC, 50Hz/60Hz
Rated power consumption 8W
External dimensions Width 440x Height 80x Depth 250 mm
Weight 3.1kg