TRIO AFX-46
¥ 28,800 (around 1966?)
Commentary
An FM/AM tuner equipped with an AM tuner section in addition to the same FM tuner section as the FX-46 model.
The use of printed circuit boards ensures stable quality and long life.
A 3-row varicon is used for the front end section, and the intermediate frequency circuit is also a double limiter (two stage noise elimination circuit) for higher sensitivity.
Noise is suppressed by an FM multi-stereo noise filter.
Equipped with an automatic switching circuit between FM mono and stereo, which is automatically switched by electronic circuit
The AM tuner section consists of a bar antenna and high-frequency amplification using a 3-row varicon.
In addition, noise is reduced by the adoption of AVC (automatic radio wave adjustment circuit), countermeasure for modulation hum (tuning hum), use of well-studied coil, etc.
Model Rating
Type | AM/FM multi-stereo tuner |
Tuner Section | |
Receiving frequency | FM : 76 MHz to 90 MHz AM : 535 kHz to 1605 kHz |
Sensitivity (30% modulation) | FM : 1.9 μ V/84MHz (at S/N 20 dB) AM : 2.2 μ V/1000kHz at S/N 10 dB |
Practical sensitivity (30% modulation) | FM : 2.5 μ V/84MHz (at S/N 30 dB) |
Image ratio | FM : 45 dB or more AM : 60 dB or more |
FM frequency characteristics | 20 Hz to 20 kHz ± 1 dB or less |
SN ratio (100% modulation) | FM : 65 dB or More (100 μ V Input) AM : 45 dB or More (1 mV Input) |
FM distortion factor | 1% or Less (400 Hz, 100% Modulation, 100 μ V Input) |
Multi-Part | |
Separation | 36 dB or More (400 Hz) |
Distortion factor | Not more than 1% |
Noise filter | Method of cutting only the noise |
Carrier leak | -50dB or less (100% modulation) |
<General> | |
Accessory circuit | FM stereo / mono automatic switching device FM stereo display lamp New type noise filter |
Used vacuum tubes and diodes | 10 vacuum tubes 6AQ8:2 6BA6:5 6AW8A:1 6AN8:1 6BE6:1 Diode 9 pcs FRIK:2 IN60:2 OA90:5 |
Pwer | 100V/117V, 50Hz/60Hz |
Power consumption | 20W |
External dimensions | Width 380x Height 150x Depth 300 mm |
Weight | 6.7kg |