TRIO LS-606
¥ 80,000 (1 unit, around 1979)
Commentary
This speaker system was developed in pursuit of "linear response" that simultaneously satisfies power linearity and flat frequency response.
A 33 cm cone woofer is installed in the low range.
A hot air pre-scone is used for the cone part, and instead of the mold used for press molding, a unique method of blowing hot air onto cone paper developed by TRIO is used.
As a result, loss and Young's modulus are intermediate between pre-scone and non-pre-scone, and rigidity is higher than both.
The 13 cm cone type skoker is mounted in the middle area.
In this unit, a center pole is installed in the part corresponding to the chamber to suppress the split vibration of the diaphragm and to make the rise and fall characteristics sharp, and the transient characteristics are improved by flattening the high-frequency characteristics.
A horn type tweeter is installed in the high frequency range.
In the Network Division, the remote independent arrangement of coils and drastic reform of wiring are carried out to reduce mutual interference.
The baffle section uses an acoustic shield baffle to improve the vibration of the woofer and high range (squaker / tweeter), and improves the orientation.
The enclosure uses a new acoustic homogen material that was developed based on the results of thorough measurements and listening tests.
Model Rating
Method | 3-Way, 3-Speaker, Bass reflex system, Bookshelf Type | ||
Unit | For Low Band : 33 cm Cone Type (LC-0070) For Middle Range : 13 cm Cone Type (MC-0062) For High Range : Horn Type (HH-0057) |
||
Frequency characteristic | 32 Hz to 20 kHz | ||
Max Input | 120W | ||
Rated input | 80W | ||
Impedance | 8 Ω | ||
Output sound pressure level | 92dB/W/m | ||
Crossover frequency | 900 Hz, 5 kHz | ||
Acoustic Level Control | Mid-range : ± 2 dB, 3 steps High frequency : ± 3 db, 3 steps |
||
External dimensions | Width 390x Height 710x Depth 323 mm | ||
Weight | 29.5kg | ||
Sold Separately | Speaker Stand SR-2000S (2 pcs 1 set, ¥ 12,000) | ||
Unit Characteristics | |||
Model number | LC-0070 | MC-0062 | HH-0057 |
Type | 33 cm cone type | 13 cm cone mold | Horn type |
Playback band | Fo ~ 2.5 kHz | 120 Hz to 15 kHz | 2.5 kHz to 20 kHz |
Output sound pressure level | 93dB/W/m | 92dB/W/m | 105dB/W/m |
Impedance | 8 Ω | 8 Ω | 8 Ω |
Magnetic flux density | 10,000gauss | 12,000gauss | 15,000gauss |
Total flux | 133,000maxwell | 53,700maxwell | 27,000maxwell |