TRIO KX-6X
¥ 59,800 (released in 1982)
Commentary
Stereo cassette deck equipped with high rigidity silent mechanism and microcomputer controlled automatic tuning device New D. P.S. S.
In order to ensure stable tape travel, a dedicated electronically controlled DC motor is used to drive the capstan. A large 47 mm diameter flywheel provides a stable capstan drive.
In addition, a dedicated DC motor is used to drive the reel so that unwanted vibration during reel drive is not transmitted to the capstan.
Equipped with New D. P.S. S. which can easily perform complicated tape operations.
With this system, you can play up to 16 tracks in front and back, repeat one track, one side full repeat, one shot rerecording, rewind play, index scan, blank search, auto-rec mute, etc.
In addition to the D. P.S. counter function that displays the number of songs when the D. P.S. S. operation is activated, it is equipped with a 4-digit digital counter with a linear tape counter function that can be read directly in real time.
For time detection, the number of revolutions of the reel is detected by a photo reflector, and is calculated and processed by a microcomputer (C-60 standard).
The head uses an amorphous recording and re-head.
With an ultrathin laminated structure, low overcurrent loss and high intrinsic electrical resistance, the structure has excellent frequency characteristics especially in the high-frequency range.
Model Rating
Type | Stereo cassette deck |
Track format | Stereo |
Recording system | AC Bias (105 kHz) |
Heads | Recording and Playback : amorphous alloy head Erasing : double-gap ferrite heads |
Motor | Capstan motors : electronically controlled DC servo motors Reel motors : DC motors Mechanical Drive Motor : DC Motor |
Wow and flutter | ± 0.065% W · Peak (EIAJ) 0.038% (WRMS) |
Early winding time | Approximately 85 seconds (C-60) |
Frequency characteristic | Normal tape : 25 Hz to 18000 Hz ± 3 dB Chrome Tape : 25 Hz ~ 18000 Hz ± 3 dB Metal Tape : 25 Hz ~ 19000 Hz ± 3 dB |
Distortion factor | Metal Tape : 1.0% (1 kHz, Third Harmonic Distortion Factor, EIAJ) |
Signal-to-noise ratio | EIAJ metal tape : 55 dB Dolby C on:72dB Dolby B on:65dB Dolby NR off:57dB |
Input terminal | Microphone : 0.3 mV (Compatible Impedance 600 Ω) Line : 77.5 mV (input impedance 50k Ω) |
Output terminal | Line : 0.39 V (output impedance 2k Ω) Headphone : 0.35 mW (output load impedance 8 Ω) |
Pwer | 100 VAC, 50Hz/60Hz |
Power consumption | 21W (Electrical Appliance and Material Control Law) |
External dimensions | EIAJ : 440 mm wide x 98 mm high x 300 mm deep Including Protrusions : Width 440x Height 111x Depth 322 mm |
Weight | 5.5kg |