TRIO KP-700D

Commentary

This is a player system using a DL motor which was completed with the idea of Trio's dynamic center rock.

It uses a DL (Dynamic Center Lock) motor system that rotates several microns of oil on the side of the spindle by two herringbone grooves carved in an inverted shape on the side of the spindle and locks the spindle at the absolute center point of rotation using the pressure of this fluid.
As a result, the side surface of the spindle achieves high rigidity rotation with side pressure of 7.5 kg without touching the bearing, and the turntable achieves stable rotation without waving.

The ARCB material has been employed in the shed structure, and the tone arm support and the rotation support of the motor are accurately held. At the same time, the DL motor is directly fixed to the ARCB material to establish the absolute position accuracy of the motor support.

450 kg / cm²It uses a double lock system that locks by inertia using a large inertia turntable and simultaneously locks by quartz.
This reduces uneven rotation during actual performance when tracing the record with the needle tip.

The motor is a newly developed 3-phase switching plane drive motor with 8-pole 6-coil structure.
Since all installed coils and all installed rotors are always used, torque ripple is small and high efficiency is realized.

There was an optional weight that was sold separately.

Model Rating

Type	Dynamic Center Lock / Quartz PLL Auto-up DD Turntable
Motor Unit
Drive system	Direct drive
Motor	Quartz PLL Coreless & Slotless 3 Phase Switching, Plane Drive, DC Servo
Starting torque	1.2 kg / cm
Turntable	33 cm, 1.9 kg aluminum alloy die-cast
Moment of inertia	450 kg / cm2(Including Rubber Sheet)
Number of revolutions	33 1/3, 45 rpm
Wow and flutter	0.008% (FG direct reading method)
Signal-to-noise ratio	80dB(DIN-B)
Tone Arm Section
Type	Static balance S-order pipe arm mass separation system
Effective arm length	245mm
Overhang	15mm
Tracking error	+ 1.8 ° ~ -1.0 °
Needle pressure variable range	0g ~ 3g (0.1g step)
Applicable Cartridge Weight	2g ~ 12g (when using the attached shell)
<General>
Attachment mechanism	Contactless optical detection auto lift-up mechanism Static type anti-skating mechanism Tone arm height adjustment mechanism (variable range 7 mm)
Pwer	100 VAC, 50Hz/60Hz
Power consumption	18W (Electrical Appliance and Material Control Law)
External dimensions	Width 490x Height 162x Depth 410 mm
Weight	12kg
Sold Separately : Dedicated Option Weight OW-1 (¥ 4,000)
Applicable Cartridge Weight Range	12g ~ 22g (Excluding Head Shell Weight 11.5g)
Weight	137.5g
Max Length	32.8mm
Max Diameter	39.8mm