KENWOOD DPF-5002
¥ 34,000 (around 1997)
Commentary
CD player with 1-bit DAC and D. R. I. V. E.
Equipped with a D. R. I. V. E. system with 8 fs 20-bit resolution using a 1-chip D. R. I. V. E. IC, the reproducibility of small levels and small signals is improved.
In order to read information on the disk more accurately and stably, a digital servo is installed.
Equipped with 1-bit D/A converter.
The chassis has a thickness of 1.6 mm to increase the strength and prevent harmful vibration.
It is equipped with functions such as editing functions which are convenient for tape dubbing, program playback, program selection, and repeat all songs / program / one song.
You can do most of the operation with the remote control attached to KAF-5002 and KAF-7002, and there was a dedicated remote control sold separately when you use the CD player by itself.
.JPG)
Model Rating
| Type | CD Player |
| Reading system | Noncontact optical readout (semiconductor laser) |
| Number of revolutions | 200 rpm ~ 500 rpm (CLV) |
| D/A converter | 1-bit 8 x oversampling |
| Frequency characteristic | 4 Hz to 20 kHz (EIAJ) |
| Signal-to-noise ratio | 100 dB or more (EIAJ) |
| Dynamic range | 92 dB or more (EIAJ) |
| Overall strain rate | 0.007% or Less (EIAJ, 1 kHz) |
| Channel separation | 92 dB or More (EIAJ, 1 kHz) |
| Wow and flutter | Below measurement limit (± 0.001% W Peak, EIAJ) |
| Output Level / Impedance | Variable Output : 2V/0.54k Ω |
| Digital output | Optical : -15dBm ~ -21dBm (emission wavelength 660 nm) |
| Power supply voltage | 100 VAC, 50Hz/60Hz |
| Rated power consumption | 10W (Electrical Appliance and Material Control Law) |
| Maximum external dimensions | Width 270x Height 133x Depth 315 mm |
| Weight | 5kg |
| Sold Separately | Remote Controller RC-P0706 (¥ 3,000) |