KENWOOD DP-1001G
¥ 48,000 (around 1995)
Commentary
K's series CD player with DAC7 in the D/A converter.
The D/A converter uses DAC7 to improve the low-frequency power sense that is often lacking in 1-bit DAC.
A discrete buffer amplifier is added to the final stage of the audio circuit to enable low-impedance output.
In addition, we carefully select the parts that affect the sound quality through a thorough hearing.
The front panel is made of 5 mm thick extruded material, the chassis is 1.6 mm hot, and the rear panel is 1.0 mm thick to increase the strength.
Program playback, repeat play, program selection and skip selection are available.
The A-1001 and X 1001 amplifiers and system control enable easy CCRS recording of CDs.
Model Rating
Type | CD Player |
Reading system | Noncontact optical readout (semiconductor laser) |
Number of revolutions | 200 rpm ~ 500 rpm (CLV) |
D/A converter | 1-bit 8 x oversampling |
Frequency characteristic | 4 Hz to 20 kHz (EIAJ) |
Signal-to-noise ratio | 105 dB or more (EIAJ) |
Dynamic range | 99 dB or More (EIAJ) |
Total harmonic distortion factor | 0.001% or less (EIAJ, 1 kHz) |
Channel separation | 94 dB or More (EIAJ, 1 kHz) |
Wow and flutter | Below measurement limit (± 0.001% W Peak, EIAJ) |
Output Level / Impedance | Fixed output : 2V/1 Ω or less |
Digital output | Optical : -15dBm ~ -21dBm (emission wavelength 660 nm) |
Power supply voltage | 100 VAC, 50Hz/60Hz |
Rated power consumption | 10W (Electrical Appliance and Material Control Law) |
Maximum external dimensions | Width 270x Height 98x Depth 316 mm |
Weight | 4.6kg |
Attachment | Remote control |