TRIO P-2500
¥ 11,900 (around the mid 1960 s?)
Commentary
Phono motor supporting 4 speeds.
A 30 cm aluminum die-cast turntable is used for the turntable part.
The drive section uses a four pole synchronous motor with a capacitor advanced phase, and the bearing section uses special steel bearings polished with precision technology.
A new design has been adopted for the groove of the rubber sheet so that records of each size can be handled easily.
Model Rating
Type | Phono motor |
Rated speed | 16 2/3, 33 1/3, 45, 78 rpm |
Motor | 4-pole condenser starting synchronous motor |
Turntable | 30 cm Aluminum Die Cast 1.7 kg |
Wow and flutter | Not more than 0.15% |
Signal-to-noise ratio | 40 dB or more |
Rated voltage | 100 VAC, 50Hz/60Hz |
Rated power | 13VA |
External dimensions | Width 330x Depth 325 mm Mounting table 50 mm, bottom 80 mm |
Weight | 3.6kg |