TRIO GE-770
¥ 49,800 (released in 1983)
Commentary
A 10-band graphic equalizer that can control the 32Hz-16kHz band.
You can freely adjust it according to the sound characteristics of the listening room and your preference.
The resonance circuit, which greatly affects sound quality, uses a semiconductor inductor circuit that uses an operational amplifier without using a coil.
It is equipped with a spectrum analyzer using a large FL display, and a total of 11 bars, 10 bars for each band and one bar for a total display, blink.
You can use Lch, Rch, and L + R independently, and the display level can be adjusted by volume.
You can operate the recording system and monitor system independently.
It also uses a -6dB attenuator to prevent clipping when over-input is applied, and an EQ IN/OUT switch to pass the equalizer.
Equipped with a character switch that reverses correction only by switching the switch.
Model Rating
Type | Graphic equalizer |
Equalizer Section | |
Variable range | -12dB + 12 dB |
Variable frequency | 32 Hz, 63 Hz, 125 Hz, 250 Hz, 500 Hz 1 kHz, 2 kHz, 4 kHz, 8 kHz, 16 kHz |
Total harmonic distortion factor | 0.003% (20 Hz to 20 kHz, 1 V Output) |
Insertion loss | 0dB |
Maximum Output Voltage (1 kHz, 0.01%) | 9V |
Frequency characteristic | 20 Hz to 20 kHz + 0. 2-0. 5 dB |
Signal-to-noise ratio (A curve) | 105dB |
Attenuator | -6dB |
Input impedance | 50k Ω |
Output impedance | 600 Ω |
Spectrum Analyzer Unit | |
Display signal level (Maximum display frequency level volume) |
Total display : 140 mVat 0 dB Analyzed Display : 30 mVat 0 dB |
<General> | |
Pwer | 100 VAC, 50Hz/60Hz |
Rated power consumption (Electrical Appliance and Material Control Law) | 14W |
Power outlet | 1 piece, 200W |
External dimensions | Width 420x Height 128x Depth 313 mm |
Weight | 4.95kg |