TRIO TW-30
¥ 36,500 (around 1965?)
Commentary
Pre-main amplifier with all-transistor configuration.
The all-transistor configuration realizes the OTL system.
It is equipped with an output stabilizing circuit that prevents transistor breakage, output equalization and over damping.
The control unit is equipped with a dual volume for volume and balance adjustment, various filters and loudness control.
Model Rating
Type | Solid state stereo pre-main amplifier |
Output | Maximum : 12W + 12W at 1 kHz No distortion : 10W + 10W (1 kHz or less, 2% harmonic distortion) |
Output side internal impedance | Approximately 3 Ω |
Load impedance | 4 Ω ~ 16 Ω |
Low power distortion | 0.35% or Less (1 kHz, 10 mW) |
Gain (1 kHz input for 10W output) | MAG:3mV Aux(Tuner):100mV |
Tone control | Bass : + 9 dB ~ -11dB (50 Hz) Treble : + 6 dB to -13dB at 10 kHz |
Loudness control | + 9 dB (100 Hz), + 4 dB (10 kHz) |
Rumble filter | -9dB(50Hz) |
Scratch filter | -12dB(10kHz) |
Equalizer | RIAA |
Residual noise | 4 mv (16 Ω) |
Startup time | About 1 second |
Service limit temperature | 50 ° C |
Semiconductors used | 22 units 2 Silicon Diodes (1S-100) 2SB257x2 2SB26x4 |
External dimensions | Width 300x Height 83x Depth 200 mm |
Weight | - |