TRIO M-6000
¥ 52,500 (around 1970)
Commentary
A stereo power amplifier with the configuration that takes out the main part of KA-6000 as it is.
Model Rating
Type | Stereo power amplifier |
Effective power | 70W/70W (8 Ω) |
Music power | 180W (4 Ω) 160W (8 Ω) |
Frequency characteristic | 10 Hz to 60 kHz ± 0.5 dB |
Output band characteristics (distortion 0.5%) | 5 hz to 60 khz -3dB |
Total harmonic distortion factor (1 kHz, 8 Ω load) | 0.1%(50W/50W) 0.05%(20W/20W) 0.1%(300mW/300mW) |
Intermodulation distortion rate (60 Hz : 7 kHz, 8 Ω load) | 0.2%(40W/40W) 0.08%(20W/20W) |
Residual noise | 0.5mV |
Damping factor | 30 (8 Ω) 60 (16 Ω) |
Input Sensitivity / Impedance | 1V/40k Ω 0.1V/100k Ω * Switching with the switch |
Low filter | 20 Hz, -12dB/oct. |
Accessory circuit | 2-speaker selector switch 12dB/oct Cut Low Filter Input-level volume Headphone jack Power transistor protection circuit Protection fuse |
Semiconductor used | Transistor : 24 Diode : 6 pcs |
Power supply voltage | 100 VAC / 117 V, 50Hz/60Hz |
Power consumption | 15W (No signal) 190W at maximum output |
External dimensions | Width 253x Height 134x Depth 280 mm |
Weight | 8.5kg |