KENWOOD KRF-V5551D
¥ 50,000 (around 2000)
Commentary
An AV amplifier compatible with Dolby digital.
By adopting 24 bitDSP chip, it is compatible with 5.1 ch Dolby digital surround.
In addition, it is equipped with Dolby Pro Logic and Dolby 3 stereo so you can enjoy various surround sound depending on the source.
It is also equipped with the Midnight Theater Mode, which can be used to control the dynamic range of Dolby digital playback when it is not possible to play at a sufficient volume in the middle of the night.
(Midnight Theater Mode only works with software that supports dynamic range control)
20-bit A / D and D/A converters are used for analog-to-digital conversion.
Equipped with an FM/AM stereo tuner, you can preset up to 40 FM/AM stations at random.
It is also equipped with a preset call function that allows you to listen to the stored stations in order.
The front 3 ch uses a banana plug-compatible screw-type speaker terminal.
The pre-out terminals for the center, surround and sub-woofer are used for perspective viewing.
Uses FL display with dimmer function.
It uses AI volume.
In addition to the basic operation with the attached remote control, it is equipped with a macro play function that allows you to register continuous operation such as turning on the power of the amplifier and MD for remote control, or playing MD.
The included remote controller is equipped with two infrared transmitters, one of which transmits signals in a linear direction over a long distance, and the other of which distributes and transmits signals over a wide range over a short distance.
Model Rating
Type | AV Center |
<Audio section> | |
Rated output (stereo, EIAJ) | 100W + 100W (40 Hz to 20 kHz, 0.7%, 4 Ω) |
Maximum Practical Output (stereo, EIAJ) | 140W + 140W (4 Ω) |
Maximum Output (Surround Mode, 1 khz, 0.7%, 4 Ω) | Front : 100W + 100W Center : 100W Surround : 100W + 100W |
Total harmonic distortion factor | 0.02% (1 kHz, 50W, 4 Ω) |
Dynamic Power | 151W (4 Ω) 116W (8 Ω) |
Signal-to-noise ratio (IHF66) | Phono MM:75dB Line(CD):91dB |
Tone control characteristics | Bass : ± 10 dB (100 Hz) Treble : ± 10 dB (10 kHz) |
Input Sensitivity / Impedance | Phono MM : 2.5mV/27k Ω Line (CD) : 200mV/47k Ω |
Output Level / Impedance | Tape rec : 200mV/1.0k Ω Center ch pre out : 1.0V/1.0k Ω Surround ch pre out : 1.0V/1.0k Ω Subwoofer pre out : 1.0V/600 Ω |
<Video Part> | |
Input Sensitivity / Impedance | Composite : 1Vp-p/75 Ω |
Output Level / Impedance | Composite : 1Vp-p/75 Ω |
FM Tuner Section | |
Receiving frequency range | 76 MHz to 90 MHz |
Antenna impedance | 75 Ω unbalance |
Practical Sensitivity (75 Ω) | Mono : 1.6 μ V/15.2 dBf (75 kHzdev, SINAD30dB) |
Harmonic distortion factor (1 kHz) | mono:0.6% stereo:0.7% |
SN ratio (at 1 kHz, 75 kHzdev, 65 dBf input) | mono:75dB stereo:65dB |
Stereo separation | 38dB(1kHz) |
Effective selectivity (± 400 kHz) | 50dB |
Frequency characteristic | 30 Hz ~ 15 kHz + 0.5 -3.0 dB |
<AM Tuner Section> | |
Receiving frequency | 531 kHz to 1602 kHz |
Practical sensitivity (30% modulation, S/N20dB) | 16 μ V (600 μ V/m) |
Signal-to-noise ratio (30% modulation, 1 mv input) | mono:48dB stereo:38dB |
Stereo separation | 30dB |
<General> | |
Power supply voltage | 100 VAC, 50Hz/60Hz |
Rated power consumption (Electrical Appliance and Material Control Law) | 250W |
Maximum external dimensions | Width 440x Height 144x Depth 400 mm |
Weight | 8.7kg |
Attachment | Remote control |