KENWOOD KR-V990D

Commentary

An AV receiver equipped with Dolby Surround AC-3 as a surround system.

It supports digital signals in the Dolby Surround AC-3 format.
Compared with Dolby Pro Logic, which decodes 2 ch analog signals, the 5.1 ch digital signal, including stereo surround sound, realizes excellent reproduction in terms of sound quality, spatial spread and dynamic range.
You can also enjoy other surround modes such as Dolby Pro Logic Surround, Dolby 3 stereo and DSP Logic.

The amplifier section uses a discrete amplifier configuration with full-scale component design for all channels.

Color OSD (On-Screen Display) is adopted, and when it is set in GUI mode, it can be operated while viewing the screen.

With the included remote control, multiple devices can be operated with one remote control using the setup code.
In addition, it has a MACRO key that can record continuous operations.

Equipped with AM stereo compatible FM/AM tuner.

Model Rating

Type	Multi-AV center
<Audio section>
Rated output (stereo mode)	120W + 120W (8 ω, 20 Hz-20 kHz, 0.003%)
Maximum practical output (stereo mode)	160W + 160W (8 ohm, EIAJ)
Maximum Output (Surround Mode)	Front : 150W + 150W (8 ohm, EIAJ) Center : 150W (8 Ω, EIAJ) Surround : 70W + 70W (8 ohm, EIAJ)
Dynamic Power	380W (2 Ω) 290W (4 Ω) 180W (8 Ω)
Total harmonic distortion factor	0.03% (20 Hz to 20 kHz, 120W, 8 Ω) 0.005% (1 kHz, 60W, 8 Ω)
Damping factor	200(1kHz)
Signal-to-noise ratio	Phono MM: 78dB(EIAJ) 75dB(IHF 66) CD, AUX, Tape : 85dB(EIAJ) 98dB(IHF 66)
Tone control	Bass : ± 10 dB (100 Hz) Treble : ± 10 dB (10 kHz)
Loudness control (Volume-30dB)	+8dB(100Hz)
Input Sensitivity / Impedance	Phono MM : 2.5mV/47k Ω CD, AUX, Tape : 200mV/47k Ω Adaptor In:200mV
Output Level / Impedance	Tape Rec : 200mV/2.2k Ω L/R, Center, Surround, Subwoofer Pre Out : 1V/1k Ω
<Video Part>
Input Sensitivity / Impedance	Video (composite) : 1Vp-p/75 Ω S-Video Y-Signal : 1Vp-p/75 ohm C-Signal : 0.286Vp-p/75 Ω
Output Level / Impedance	Video (composite) : 1Vp-p/75 Ω S-Video Y-Signal : 1Vp-p/75 ohm C-Signal : 0.286Vp-p/75 Ω
Signaling system	NTSC
FM Tuner Section
Receiving frequency range	76 MHz to 90 MHz
Antenna impedance	75 Ω unbalance
Practical sensitivity	Mono : 1.2 μ V (75 Ω) / 13.2 dBf (75 kHzdev, S/N30dB)
Harmonic distortion factor (1 kHz)	mono:0.6% stereo:0.7%
SN ratio (1 kHz 75 kHz dev)	mono:75dB stereo:68dB
Stereo separation	40dB(1kHz)
Effective selectivity (± 400 kHz)	50dB
Frequency characteristic	30 Hz ~ 15 kHz + 0.5 -3.0 dB
<AM Tuner Section>
Receiving frequency	531 kHz to 1602 kHz
Practical sensitivity (30% modulation, S/N20dB)	16 μ V (500 μ V/m)
Signal-to-noise ratio (30% modulation, 1 mv input)	mono:45dB stereo:38dB
Total harmonic distortion factor	mono:0.7% stereo:1%
Stereo separation	30dB
Effective selectivity	30dB
<General>
Power supply voltage	100 VAC, 50Hz/60Hz
Rated power consumption (Electrical Appliance and Material Control Law)	330W
Maximum external dimensions	Width 440x Height 162x Depth 396 mm
Weight	13.1kg
Attachment	GUI-compatible preset universal remote control Repeater