TRIO KR-5340
¥ 99,800 (around 1973)
Commentary
A high-end receiver with four main amplifiers and two BTL connections to each left and right.
The FMMPX section adopts TRIO's unique double-switching and de-modulator method, and the separation is greatly improved over a wide band from 50 Hz to 8 kHz.
In addition, the FM DET terminal is also installed in preparation for FM discrete broadcasting, which was expected to begin at that time.
With built-in SQ decoder and RM circuit, it is also possible to form a 4-channel system by adding 2 rear speakers (CD-4 demodulator and CD-4 cartridge are required for CD-4 playback).
Model Rating
Type | AM/FM stereo receiver | ||||
FM Tuner Section | |||||
Receiving frequency | 76 MHz to 90 MHz | ||||
Antenna impedance | 300 Ω Balanced Type / 75 Ω Unbalanced Type | ||||
Sensitivity | 2.0 μ V | ||||
Chinese arrowhead's slope | 48 dB (5 μ V) 60 dB (10 μ V) 63 dB (50 μ V) |
||||
Distortion Factor (400 Hz, 100% modulation) | Mono : 0.5% or less Stereo : 0.8% or less |
||||
SN ratio (100% modulation, 100 μ V input) | 63 dB or more | ||||
Capture ratio | 3.0dB(IHF) | ||||
Selectivity | 50 dB or more (IHF) | ||||
Image ratio | 60 dB or more | ||||
IF interference ratio | 90 dB or more | ||||
AM suppression ratio | 60 dB or more | ||||
Harmonic spurious ratio | 90 dB or more | ||||
Separation (1 kHz) | 40 dB or more | ||||
Band Separation (50 Hz to 8 kHz) | 28 dB or more | ||||
Subcarrier suppression ratio | 45 dB or more | ||||
<AM Tuner Section> | |||||
Receiving frequency | 520 kHz to 1,610 kHz | ||||
Sensitivity | 25 μ V (IHF) | ||||
Selectivity | 30 dB or more (IHF) | ||||
Image ratio | 45dB | ||||
IF interference ratio | 35 dB or more | ||||
Amplifier Unit | |||||
Music Power (IHF) | 2-channel operation : 96W (8 Ω) 4-channel operation : 80W (8 Ω) |
||||
Effective power |
|
||||
Total harmonic distortion factor (8 Ω at rated output) | Not more than 0.8% 0.3% or less (-3dB) |
||||
Intermodulation distortion factor (60 Hz : 7 khz = 4 : 1, at rated output, 8 Ω) | Not more than 0.8% 0.3% or less (-3dB) |
||||
Damping factor | 20 (4-channel operation, 1 kHz, 8 Ω) | ||||
Residual noise (4-channel operation) | 1 mV or less | ||||
Input Sensitivity / Impedance | Phono : 2.5mV/50k Ω AUX, Tape Play (PIN) : 150mV/50k Ω |
||||
Recording Level / Impedance | Tape Rec (PIN) : 150mV/100 Ω Tape Rec(DIN):40mV |
||||
Maximum Input Voltage | 100mV RMS 1kHz | ||||
Signal-to-noise ratio | Phono:60dB AUX, Tape Play : 75 dB |
||||
Frequency characteristics (AUX, Tape Play) | 20 Hz to 20 kHz ± 1 dB | ||||
Equalizer (versus RIAA standard curve) | ± 1 dB | ||||
Tone control | Bass : 100 Hz, ± 10 dB Treble : 10 kHz, ± 10 dB |
||||
Loudness control (-30dB) | 100Hz:+10dB 10kHz:+5dB |
||||
<General> | |||||
Power supply voltage | 100 VAC / 117 V, 50Hz/60Hz | ||||
Power consumption | 115W (Electrical Appliance and Material Control Law) | ||||
External dimensions | Width 500x Height 153x Depth 360 mm | ||||
Weight | 14.5kg |