TRIO KM-4002
¥ 22,800 (around 1970)
Commentary
A stereo power amplifier in which the main amplifier section of the KA 2600 is independent.
The all-silicon transistor configuration improves the characteristics of the amplifier.
Two types of speakers can be connected.
Equipped with an input sensitivity selector switch, the output from the tuner or tape deck can be directly controlled.
It has a headphone port.
Model Rating
Type | Stereo power amplifier | ||
Effective power |
|
||
Music Power (IHF) | 70W (4 Ω) 55W (8 Ω) |
||
Frequency characteristic | 15 Hz to 50 kHz ± 1 dB | ||
Output Bandwidth Characteristics (IHF) | 15 Hz to 70 kHz | ||
Total harmonic distortion factor (8 Ω load) | 0.5% (at rated output) 0.05% (at rated output -3dB) |
||
Intermodulation distortion rate (60 Hz : 7 kHz, 8 Ω load) | 0.5% (at rated output) 0.09% (at rated output -3dB) |
||
Residual noise | 0.8mV | ||
Damping factor | 80 (8 Ω) | ||
Input Sensitivity / Impedance | 1V/100k Ω 0.1V/100k Ω |
||
Accessory circuit | 2-speaker selector switch Input-level volume Headphone jack AC outlet (2 systems) |
||
Semiconductor used | Transistor : 13 Diode : 10 pcs |
||
Power supply voltage | 100 VAC / 117 V, 50Hz/60Hz | ||
Power consumption | 18W (no signal) 120W at maximum output |
||
External dimensions | Width 253x Height 134x Depth 280 mm | ||
Weight | 4.5kg |