TRIO KA-3004
¥ 39,800 (released in 1973)
Commentary
A pre-main amplifier developed by inheriting the design philosophy of the Hi-ATC series high-grade equipment.
All stages are directly connected + pure complimentary service circuit is adopted for the power amplifier section.
The equalizer uses a two stage, two power supply system.
The tone control also has a tone defeat switch.
Model Rating
Type | Solid-state stereo premain amplifier | |||||||
Power Amplifier Unit | ||||||||
Effective power |
|
|||||||
Music Power (IHF) | 80W (4 Ω) 52W (8 Ω) |
|||||||
Total harmonic distortion factor (8 Ω) | 0.5% (at rated output) 0.07% (Rated Output -3dB) |
|||||||
Cross modulation distortion factor | 0.5% (at rated output) 0.2% (Rated Output -3dB) |
|||||||
Output Bandwidth (IHF) | 10 Hz to 45 kHz | |||||||
Optimum load impedance | 4 Ω ~ 16 Ω | |||||||
Damping factor | 32 | |||||||
Output terminal | Speakers and headphones : 4 Ω ~ 16 Ω | |||||||
Preamplifier Section | ||||||||
Input Sensitivity / Impedance | Phono1, 2 : 2.5mV/50k Ω Tuner, AUX, Tape PlayA, B : 150mV/180k Ω MIC : 1.3mV/10k Ω (Maximum Volume) |
|||||||
Signal-to-noise ratio | Phono1, 2 : 65 dB Tuner, AUX, Tape PlayA, B : 75 dB MIC:65dB |
|||||||
Maximum Allowable Input (1 kHz) | 280mV(P-P) | |||||||
Output Level / Impedance |
|
|||||||
Frequency characteristic | Tuner, AUX, Tape Play : 20 Hz to 50 kHz ± 1 db Phono1 and 2 : RIAA deviation ± 0.5 dB |
|||||||
Tone control | Bass : 100 Hz ± 10 dB Treble : 10 kHz ± 10 dB |
|||||||
Filter | High : 7 kHz, 6dB/oct. | |||||||
Loudness control (rated output -30dB) | 100Hz:+8dB 10kHz:+3dB |
|||||||
<General> | ||||||||
Power supply voltage | 100 VAC / 117 V, 50Hz/60Hz | |||||||
AC outlet | Power switch interlock : 2 systems Power switch not linked : 1 system |
|||||||
Rated power consumption (Electrical Appliance and Material Control Law) | 50W | |||||||
External dimensions | Width 435x Height 153x Depth 300 mm | |||||||
Weight | 8.5kg |