TRIO KA-2002A
¥ 26,800 (around 1972)
Commentary
A pre-main amplifier based on KA 2002 and improved.
It has been developed with an emphasis on basic performance and has a simple configuration without any circuitry such as a tone control defeat switch.
Model Rating
Type | Solid-state stereo premain amplifier | ||||
Power Amplifier Unit | |||||
Effective output (1 kHz) |
|
||||
Music Power (IHF) | 46W (4 Ω) 38W (8 Ω) |
||||
Total harmonic distortion factor (8 Ω) | 0.8% (at rated output) 0.2% (Rated Output -3dB) |
||||
Cross modulation distortion factor | 0.8% (at rated output) 0.2% (Rated Output -3dB) |
||||
Output bandwidth | 20 Hz to 30 kHz | ||||
Frequency characteristic | 20 Hz to 30 kHz ± 2 dB | ||||
Output terminal | Speaker : 4 Ω ~ 16 Ω Headphone : 4 Ω ~ 16 Ω |
||||
Damping factor | 50 (1 kHz, 8 Ω) | ||||
Preamplifier Section | |||||
Input Sensitivity / Impedance | Phono1, 2 : 2mV/50k Ω Tuner, AUX, Tape PlayA, B : 150mV/50k Ω |
||||
Signal-to-noise ratio | Phono1, 2 : 60 dB Tuner, AUX, Tape PlayA, B : 70 dB |
||||
Output Level / Impedance |
|
||||
Tone control | Bass : ± 10 dB (100 Hz) Treble : ± 10 dB (10 kHz) |
||||
Loudness control (Rated output -30dB) |
100Hz:+8dB 10kHz:+4dB |
||||
<General> | |||||
Power supply voltage | 100 VAC / 117 V, 50Hz/60Hz | ||||
Power consumption (Electrical Appliance and Material Control Law) | 40W | ||||
External dimensions | Width 352x Height 118x Depth 240 mm | ||||
Weight | 5.4kg |