TEAC f-510
¥ 69,800 (around 1978)
Commentary
A stereo cassette deck equipped with an FL bar graph display based on the f-500.
It is equipped with an FL bar graph display which is a fluorescent tube type peak level meter. This meter has a faster response speed than a mechanical meter and can accurately capture sound peaks.
The display brightness can be switched in two levels, and peaks of 0 VU or more can be displayed with a peak hold mechanism. You can also choose between two peak hold resets : auto and manual.
Improved operability is achieved by adopting logic control and micro switch.
The logic control allows direct switching from one mode to another.
The input volume is an L/R-independent type that makes it easy to set recording levels on the left and right sides. In addition, the input volume is a differential type that moves one side to move the other side.
A FG servo DC motor is used in the mechanism section. This motor has a built-in frequency generator (FG) to eliminate changes in motor rotation caused by voltage and frequency fluctuations of the power supply.
In addition, high-precision capstan shafts, large flywheels, and precision polishing flat belt are used to improve the transmission system.
HD ferrite head is used for the head.
It is equipped with a line / microphone input change-over switch, and by sending the line input directly to the recording amplifier, distortion and noise amplifier.
In order to take advantage of the performance of the tape, it has a 3-stage switching mechanism with independent bias and equalizer.
Equipped with a Dolby system.
Equipped with a Rec Mute mechanism.
It is equipped with a memory counter that can start a song.
Equipped with a timer mechanism.
There was a rack handle sold separately.
By connecting a separately sold remote control unit, it can be operated from a remote location.
Model Rating
Type | Cassette deck |
Track format | 4-track, 2-channel stereo system |
Heads | HD ferrite head |
Tape used | C-30 ~ C-90 |
Tape speed | 4.8cm/s |
Motor | FG servo DC motor |
Wow and flutter | 0.06%(Wrms) |
Early winding time | Up to 90 seconds (C-60 tape) |
Frequency characteristic | 30 Hz ~ 16 kHz (Chrome Tape) |
Overall signal-to-noise ratio | 56 dB (3% distortion level, acoustic compensation) Dolby rerecording improvement : 5 dB (1 kHz), 10 dB (5 kHz or more) |
Input Sensitivity / Impedance | Microphone : 0.25mV/-72dB/600 Ω or more compatible Line : 60mV/50k Ω |
Output Level / Impedance | Line : 0.3V/50k Ω or more Headphone : 8 Ω |
Pwer | 100 VAC, 50Hz/60Hz |
Power consumption | 27W |
External dimensions | Width 440x Height 147x Depth 345 mm |
Weight | 9kg |
Sold Separately | Remote Controller RC-90 (¥ 10,500) Rack Handle AH-20 (¥ 3,500) |