TEAC A-4010
¥ 99,800 (around 1966?)
Commentary
Stereo tape deck combining A-4000 with RA-40 for recording only amplifier.
In order to automatically play back and forth a 4-track stereo tape, a special head for reverse playback has been added, and a total of 4 heads are installed.
The head has a hyperbolly-shaped surface and uses a 3-micron (regenerative) gap, front shield and precision processing to improve the frequency range and crosstalk.
The motor is a 3-motor type with independent motors for tape drive, rewinding and winding.
The tape drive motor and reel motor are equipped with a hysteresis torque motor, and the capstan uses a 4-pole 8-pole 2-speed motor.
Equipped with a symmetrical control system, you can play forward and backward, fast forward in both directions and stop with 4 buttons.
Equipped with an automatic reverse playback function, it can automatically perform reverse playback at the desired position by attaching a sensing foil to the back of the tape.
In addition, it is equipped with an automatic stop function, and when rewind or reverse direction play is finished, a switch linked to the tension arm works and stops automatically.
Equipped with a tape tension switch, the back tension can be switched to 2 levels depending on the thickness of the tape, so there is no worry of damaging the tape.
Equipped with a monitor changeover switch, the source and tape can be switched for monitoring, so that the recorded state can be checked simultaneously with the recording.
Equipped with a 4-digit index counter.
Model Rating
Type | Tape deck |
Track format | 4-track, 2-channel stereo system |
Reel | Maximum 7 |
Tape speed | 19 cm, 9.5 cm (± 0.5%) |
Motor | 1 x 2-speed hysteresis motor Hysteresis torque motor x2 |
Heads | A total of 4 units for erasing, recording, playback, and reverse playback |
Wow flutter | 19cm:0.12% 9.5cm:0.15% |
Early winding time | Approx. 70 seconds (360m tape) |
Frequency characteristic | 19 cm : 30 Hz to 20 kHz (50 Hz to 15 kHz ± 3 dB) 9.5 cm : 40 Hz to 12 kHz (50 Hz to 7.5 kHz ± 3 dB) |
Equalization | 19 cm : 50 μ s 9.5 cm : 120 μ s |
Signal-to-noise ratio | 50dB |
Crosstalk | Channel-to-channel : 50 dB at 1 kHz Track to track : 40 dB (100 Hz) |
Input Sensitivity / Impedance | Line : 0.14 V (minimum) / 100k Ω Microphone : 0.25 mV (minimum) / 10k Ω |
Output Level / Impedance | 1V/100k Ω or more |
Pwer | AC100V/117V/220V, 50Hz/60Hz |
Power consumption | 110VA |
External dimensions | Width 440x Height 445x Depth 240 mm |
Weight | 22kg |