SONY SA-VE815ED
¥ 150,000 (1 set, sold on August 10, 2000)
Commentary
This speaker package is a set of satellite speakers that can play back very high frequencies.
Satellite speaker
Two 5 cm cone type speakers are installed for the low range.
A repartion magnetic circuit is adopted for the magnetic circuit. By mounting two neodymium magnets with a plate sandwiched between them so that the magnetic flux faces each other, the area of strong magnetic flux acting on the voice coil is expanded, and the braking force of the diaphragm is improved. In addition, the driving force is increased by increasing the diameter of the voice coil.
In addition, this unit uses a plastic butterfly damper to improve the linearity of the amplitude against the input and to obtain a sharp rising sound.
A 1.9 cm dome type tweeter is installed in the high range.
A carbon-graphite composite diaphragm is used for the diaphragm, enabling ultra-high frequency reproduction up to 70 kHz.
An aluminum die cast oval enclosure is used for the enclosure.
It comes with 2 types of net grills, silver and light blue.
Subwoofer
The unit is equipped with 20 cm cone type woofer.
The high-speed MFB circuit expands the low-frequency reproduction capability, and a large power transformer and high-sound condenser are used.
The advanced SAW system is used for the enclosure.
In the advanced SAW system, an appropriate radiator is installed in the front baffle to prevent delay of the emitted sound and to achieve both good response and heavy bass reproduction.
Equipped with a mode selection switch for movies and music.
Also equipped with auto power ON/OFF function.
Other
There were floor stand, TV bracket, wall mounting bracket and so on sold separately.
These accessories are available in two color variations : black and silver.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Model Rating
| Type | Speaker package |
| Effective frequency band | 24 Hz ~ 70 kHz (Total System) |
| Satellite Speaker | |
| Method | 2-Way, 3-Speaker, Setting-Free Type, Magnetic Protection Design |
| Units Used | For Low Band : 5 cm cone x2 For high-pass : 1.9 cm dome type |
| Impedance | 8 Ω |
| Max Input | 140W |
| Output sound pressure level | 87dB/W/m |
| External dimensions | 86 mm wide x 169 mm high x 130 mm deep |
| Weight | Approx. 1.3 kg |
| <Subwoofer> | |
| Method | 1-Way, 1-Speaker, Advanced SAW System, Floor Type, Anti-magnetic Design |
| Units Used | For low band : 20 cm cone type |
| Maximum practical power | 150W(EIAJ) |
| Pwer | 100 VAC, 50Hz/60Hz |
| Power consumption | 135W |
| External dimensions | Width 230x Height 395x Depth 495 mm |
| Weight | Approx. 17.5 kg |
| <Others> | |
| Attachment | Desktop Speaker Stand (with angle adjustment mechanism for center) Speaker Grill (Silver / Light Blue) x 5 each Speaker cables 10mx2, 2.5mx5 One audio cable |
| Sold Separately : Floor Stand WS-FV10/WS-FV10A (1 set of 2, ¥ 12,000) | |
| External dimensions | Width 235x Height 810 ~ 1,170x Depth 235 mm |
| Weight | Approx. 3.1 kg |
| Sold Separately : TV Bracket WS-TV10/WS-TV10A (1 set of 2, ¥ 5,000) | |
| External dimensions | 80 mm wide x 350 mm high x 160 mm deep |
| Weight | Approx. 0.25 kg |
| Sold Separately : Wall Mounting Bracket WS-WV10/WS-WV10A | |
| External dimensions | Width 60x Height 110x Depth 95 mm |
| Weight | Approx. 0.6 kg |
.jpg)