SONY SS-V2/SS-V2M
¥ 29,800 (1 unit, around 1978)
Commentary
V-series bookshelf type speaker system developed by inheriting G-series technology.
A 25 cm cone type woofer is installed in the low range.
The diaphragm is made of a light, highly rigid CARBOCON with low resonance sharpness. The rigidity is improved by special impregnation of the cone paper. The magnetic circuit is made of a 120 mm diameter magnet, achieving 11,500 Gauss.
A voice coil with a diameter of 50 mm has been adopted to realize a tight low sound by increasing the braking effect.
In addition, the use of die-cast frames reduces split vibration and unwanted resonance.
A 5 cm cone type tweeter is installed in the high range.
By making the magnetic circuit of the tweeter narrow gap and driving the voice coil at higher density, high efficiency is achieved and the transient response characteristics are also improved.
The enclosure uses an AG board to prevent interference between direct and reflected waves and sharp directional characteristics.
Also, the internal volume is 45 liters.
There were two variations.
There were 2 types of speaker stand sold separately.
Model Rating
Method | 2-Way, 2-Speaker, Bass Reflex System, Bookshelf Type |
Unit | For low band : 25 cm cone type For high-pass : 5 cm cone type |
Playback frequency band | 40 Hz to 20000 Hz |
Output sound pressure level | 94dB/W/m |
Impedance | 6 Ω |
Rated maximum input | 60W |
Instantaneous maximum input | 120W |
Crossover frequency | 1700Hz |
Level control | For High Frequency : 0 dB ~ -50dB Continuously Variable |
External dimensions | Width 350x Height 575x Depth 335 mm |
Weight | Approx. 15.5 kg |
Attachment | Speaker cable 3mx1 |
Sold separately : Speaker Stand WS-V4 (1 set of 2, ¥ 7,600) | |
External dimensions | Width 340x Height 255x Depth 295 mm |
Weight | 2.9kg |
Sold separately : Speaker Stand WS-V2 (1 set of 2, ¥ 5,900) | |
External dimensions | Width 350x Height 145x Depth 290 mm |
Weight | 3.5kg |