Audio Database
TC-D5M
Commentary

Portable Cassette Recorder "Cassette Denske D5M" for Metal Tape

An original disk drive capstan servo is used in the mechanism section.
It consists of three components : a capstan servo control that has the same effect as a direct drive, a disk drive system that directly connects the motor shaft and the flywheel, and a small, low-power, high-torque coreless motor. Even with a small mechanism, it achieves high anti-rolling effect and high torque.

The head uses an S & F head compatible with metal tape.
We have also adopted a DC-DC converter with improved efficiency to stably supply a large bias current.

Equipped with a 4-stage tape selector that can be switched with a single switch.

Equipped with peak level indicator.

Equipped with a Sony Limiter to suppress excessive input.

Equipped with Dolby NR system.

Equipped with a microphone attenuator.

Equipped with MPX filter.

Built-in monitor speaker.

It uses 3 power sources compatible with 100 VAC, dry batteries and car batteries.

There was a carrying case sold separately.

Model Rating
Type Portable cassette recorder
Heads Erase : 1
Recording : 1
Motor Frequency servo coreless motor using variable reluctance type FG
Signal-to-noise ratio 59 dB (Dolby off, peak level, metal cassette)
Frequency characteristic 20 Hz ~ 19 kHz (Metal Cassette)
Wow and flutter 0.06%wrms
Distortion factor 1.0% (Metal Cassette)
Monitor output 200mW(EIAJ)
Pwer 100 VAC (Use Separately Sold AC-61)
Dry battery 3 v (D 1x2)
Car Battery (Use Separately Sold ACC 120)
Battery life About 5.5 Hours (Eveready Alkali AM1)
Approximately 2 hours (Sony Super SUM-1S)
Power consumption 12VA(50Hz)
11VA(60Hz)
External dimensions Width 237x Height 48x Depth 168 mm
Weight 1.7 kg (including dry batteries)
Sold Separately Carrying Case LC-D5 (¥ 6,000)