SONY TC-2050SD
¥ 38,800 (around 1973)
Commentary
A stereo cassette deck equipped with a Dolby system.
The Dolby system reduces the noise and hissing of the tape.
Sony's original ferrite and ferrite head is used for the head.
In this head, ferrite is used not only in the core but also in the guard part to reduce factors that cause changes in frequency characteristics such as head wear, gap edge collapse, dust adhesion, etc. Moreover, abrasion resistance is approximately 200 times that of conventional heads, and head erosion is also reduced.
In addition, the black mirror finish on the surface of the head gives a stable finish even when used for a long time.
Equipped with a limiter recording method.
If the limiter switch is set to ON after manual level adjustment, the correct input will be recorded as manual recording, and the limiter circuit will operate automatically only when a large input is entered unexpectedly to prevent distortion.
It uses an auto shut-off mechanism and stops automatically when the tape finishes winding in any case of recording, playback, fast forward or rewind. The operation button and the head pinch roller automatically return to the stop position so that no unnecessary burden is placed on the mechanism or tape.
Equipped with a tape selector, a Sony Chromicassette can be used.
Equipped with a push-push pause button. If you press the pause button once, the mechanism stops temporarily, and if you press it further, it returns to the original state.
Uses a high-performance DC motor, eliminating the need for cycle switching.
A low-noise silicon transistor is used in the preamplifier to achieve low distortion and low noise.
Model Rating
Type | Stereo tape deck |
Tape speed | 4.8cm/s |
Track system | 4-track 2-channel stereo |
Recording time | 120 minutes round trip by C-120 |
Total S/N | 48 dB (with Dolby NRON, S/N improved by 1 kH 5 dB, 5 kHz or more 10 dB) |
Overall strain rate | Not more than 2.5% |
Frequency characteristic | 40 Hz ~ 15 kHz (Sony Chromicassette used) 40 Hz ~ 13 kHz (General Tape Used) |
Wow and flutter | 0.22%Wrms |
Input Sensitivity / Impedance | My Kujac (2 systems) : maximum sensitivity 0.2 mV / low impedance Line input jack (2 systems) : Maximum sensitivity of 0.06V/100k Ω or more Recording and re-connector (input side) : 10k Ω or less |
Output Level / Impedance | Line output jack (2 systems) : Reference output 0.775V/100k Ω load Stereo headphone jack : 8 Ω Re-connector : 50k Ω or more |
Semiconductor used | Transistor : 32 Diode : 20 pcs |
Pwer | 100 VAC, 50Hz/60Hz |
Power consumption | 8W |
External dimensions | Width 388x Height 95x Depth 230 mm |
Weight | 4.1kg |
Attachment | Connection code RK-74x2 Head Cleaning Rod x1 Set |