SONY PS-LX300H
¥ 35,000 (released in 1996)
Commentary
A manual record player that matches a full-size component.
It is equipped with an aluminum diecast turntable with a large moment of inertia and a mass of approximately 900g. A large type insulator is also used to absorb external vibration.
In addition, an inside four scan seller (anti-skating mechanism) is installed.
Adoption of universal tone arm allows replacement of shell and cartridge.
Equipped with speed adjustment function with strobe.
Two spare replacement needles were included as standard.
Model Rating
| Type | Stereo record player |
| <Turntable portion> | |
| Turntable | 33 cm Aluminum Die Cast |
| Number of revolutions | 33 1/3, 45 rpm |
| Drive system | Belt drive |
| Speed adjustment range | + / - 10 per cent |
| Wow and flutter | 0.15% WRMS (Rotating System) |
| Start-up characteristic | Within 1 Second (at 33 1/3rpm) |
| Signal-to-noise ratio | 55dB(DIN-B) |
| Tone Arm Section | |
| Type | Static balance type |
| Effective length | 230 + / - 2 mm |
| Needle pressure adjustment range | 0g ~ 3g |
| Cartridge Section | |
| Type | MM Type |
| Proper needle pressure | 2.5g ± 0.5g |
| Exchange needle | CN-251 |
| Output voltage | 6mV(1kHz) |
| <General> | |
| Power supply voltage | 100 VAC, 50Hz/60Hz |
| Power consumption | 6W or less |
| External dimensions | Width 450x Height 160x Depth 360 mm |
| Weight | Approx. 7 kg |
| Attachment | 45 Rotation Adapter Replacement Needle (CN-251) x2 Dust cover |