SONY PS-2700

Commentary

Equipped with a full auto mechanism such as the protection mechanism of the tone arm, this full auto player pursues operability and safety.

A belt drive system is used to drive the 30 cm aluminum die cast turntable, and a synchronous motor with less vibration developed exclusively for players is used for the motor.
In addition, it uses a double-side polished urethane belt.

Static balanced tone arm is used for the arm.
A pivot bearing is used for the bearing section to increase sensitivity, and the support section is supported by a damper for vibration resistance design.
In addition, it is equipped with an inside four scan cellar that cancels the inside force according to the performance point of the record.

The cartridge is equipped with VL-15G.

It uses a special insulator with a high vibration absorption rate and is equipped with a height adjustment mechanism.

Comes with a removable acrylic dust cover.

Equipped with a replacement shell stand.

Model Rating

Type	Full auto player
<Turntable portion>
Turntable	30 cm Aluminum Die Cast
Motor	Synchronous motor
Drive system	Belt drive
Number of revolutions	33 1/3, 45 rpm
Wow and flutter	0.06%WRMS
Signal-to-noise ratio	63dB(DIN-B)
Tone Arm Section
Tone arm	Static allowance S-shaped
Effective length	216.5mm
Total Length	300mm
Overhang	16.5mm
Needle pressure adjustment range	0 ~ 3g
Shell dead weight	7.5g(SH-135)
Usable cartridge dead weight	4g ~ 10g (when using the attached shell)
Cartridge Section
Cartridge type	MM Type (VL-15G)
Frequency characteristic	10 Hz to 30 kHz
Output voltage	4 mv (5cm/s, 1 khz)
Optimum load impedance	50k Ω ~ 100k Ω
Needle pressure (optimum needle pressure)	1.2g ~ 2.5g (1.7g)
Needle tip shape	0.6 mil diamond needle
Dead weight	5.2g
<General>
Power supply voltage	100 VAC, 50Hz/60Hz
Power consumption	8W
External dimensions	Width 445x Height 160x Depth 370 mm
Weight	8kg
Attachment	45 Rotation Adapter Tracking error confirmation gauge Cartridge spacer Driver for adjusting needle position