SONY PS-2100
¥ 21,000 (around 1970)
Commentary
A record player with a universal tone arm that allows the cartridge to be freely exchanged.
A belt drive system is used for the drive part, and a synchronous type motor is used for the constant rotation regardless of voltage changes.
The turntable is made of aluminum die-cast.
Uses a universal tone arm.
The shell uses a 4-pin type standard that can be replaced freely, and the arm uses a newly developed static balanced pipe arm for excellent tracing performance.
High-compliance MM type cartridges are used.
It comes with a protective device that does not damage the belt even if the speed is changed when the turntable is not rotating.
The cabinet has a walnut finish.
It is also equipped with a smoked plastic dust cover.
Model Rating
Type | Record player system |
<Turntable portion> | |
Turntable | 30 cm Aluminum Die Cast |
Motor | 4-pole synchronous motor |
Drive system | Belt drive |
Number of revolutions | 33 1/3, 45 rpm |
Wow flutter | 0.1% RMS or less |
Tone Arm Section | |
Tone arm | Static balance type |
Effective length | 215mm |
Overhang | 15mm |
Needle pressure adjustment range | 0 ~ 3g, 0.5g step |
Shell | Universal plug-in system |
Weight of attachable cartridge | 4g ~ 14g Up to 18g (When Using Replacement Weight CW-44) |
Cartridge Section | |
Cartridge | MM Type (VM-21P) |
Frequency characteristic | 20 Hz to 20 kHz |
Separation | 20dB |
Load impedance | 50k Ω |
Optimum needle pressure | 3g |
Needle | 0.7 mil diamond needle |
<General> | |
Power supply voltage | 100 VAC, 50Hz/60Hz |
Power consumption | 14W |
External dimensions | Width 436x Height 156x Depth 356 mm |
Weight | 5.5kg |
Attachment | 45 Rotation Adapter |
Sold Separately | Shell SH-120 (¥ 1,000) Replacement Needle ND-125P (¥ 1,500) Replacement Weight CW-44 (¥ 1,500) |