SONY PS-150
¥ 29,100 (released in 1981)
Commentary
An auto player system with a built-in headphone amplifier.
With a built-in phono equalizer amplifier, it can be easily connected to a radio cassette or component.
Low-mass straight arm is used for the tone arm.
It is equipped with linear BSL motor and magnedisk servo.
Equipped with auto return and reject mechanism.
30 It comes with a disc centering guide that can fit the center hole of the record board when setting the cmLP board.
Model Rating
| Type | D. D. Auto Player System with Headphone Amplifier |
| <Turntable portion> | |
| Turntable | 30.4 cm Aluminum Die Cast |
| Wow and flutter | 0.03% WRMS (rotating system) |
| Signal-to-noise ratio | 72dB(DIN-B) |
| Tone Arm Section | |
| Tone arm | Static balance type |
| Effective length | 216.5mm |
| Total Length | 275mm |
| Cartridge Section | |
| Cartridge | MM Type (VL-38GSA) |
| Frequency characteristic | 20 Hz to 20 kHz |
| Needle | 0.6 mil-round diamond |
| Exchange needle | ND-138G(¥3,000) |
| Amplifier Unit | |
| Output terminal | Line out (pin plug) : 250 mv (at 50k Ω load) Headphones (stereo standard jack) : 8.5mWx2 at 32 ohm load |
| Frequency characteristic | RIAA ± 0.5 dB |
| <General> | |
| External dimensions | Width 430x Height 105x Depth 345 mm |
| Weight | 4.6kg |
| Attachment | 45 Rotation Adapter Cartridge (VL-38GSA) Disk centering guide Dust cover |