SONY TAD-M30

Commentary

A compact Dolby digital processor with a Dolby digital decoder and 3 ch power amplifier.

It can be used in combination with the DVD player DVP-M30 and DHC-MD919/MD717 of the Pixy series.

The power amplifier section is equipped with power amplifiers for three channels. These circuits are equipped with a dynamic three amplifier system.
This amplifier can be used as front (L/R) + center when used alone or as rear (L/R) + center when used with the Pixie series or other audio systems.
When used alone, a virtual enhanced surround effect that virtually creates a rear speaker can be added, and surround playback can be enjoyed with three speakers.

In combination with MD Pixy DHC-MD919/MD717, you can use the TAD-M30 to automatically switch functions during DVD playback and to adjust the volume of the Pixy front speakers.

It has a built-in Dolby digital processor with 24-bit DSP and can be connected to the digital output of a DVD player to decode 5.1 ch Dolby digital.

When combined with Pixie series and other audio systems, you can enjoy surround effects such as Cinema Studio mode and virtual 3D mode.

Equipped with a base boost button.

It is equipped with 2 systems of digital input which is coaxial with optical system.

Wireless remote control is included.

Model Rating

Type	Dolby Digital Processor
Maximum Practical Output (EIAJ, 6 Ω)	Front / Rear : 30W + 30W (Switching Type) Center : 30W
Total harmonic distortion factor	Front : 0.09% or less (6 ohm load, 20W + 20W, 20 hz to 20 khz)
Frequency characteristic	Digital : 20 Hz to 20 kHz + 1-3 dB
Signal-to-noise ratio	Digital:80db
Surround Mode	18 Program 35 Mode (see table below)
Dolby Pro Logic Input Balance	Auto
Tone control	Common to front, center and rear Bass : ± 10 dB (center frequency : 99 to 992 Hz) Treble : ± 10 dB (center frequency : 1.0 to 8.6 kHz) Increment / decrement step : 1 dB
Digital input	Light : 1 system Coaxial : 1 system
Digital output	Route 1
Audio Out	Front L/R : 1 system Subwoofer : 1 line
Pwer	100 VAC, 50Hz/60Hz
Power consumption	40W
External dimensions	Width 280x Height 91x Depth 350 mm
Weight	Approx. 4.5 kg
Attachment	Wireless Remote Control RM-MS30
Surround mode installed in TAD-M30 　 Dolby Pro Logic Dolby Enhanced Pro Logic Small Theater Large Theater Mono-Movie Cinema Studio A(*2) Cinema Studio B(*2) Cinema Studio C(*2) Virtual Multi Rear (A / B) (* 2) Virtual Rear Shift (A / B) (* 2) Virtual Enhanced Surround Stadium Game Hall Opera House Jazz Club Live House Karaoke(*1) * 1 : In the case of AC-3 input, since processing is performed after downmixing to 2 ch, the sound field becomes the same as that of analog 2 ch. * 2 : When used in combination with Pixie series or other audio systems.