SONY TAD-43F
¥ 25,000 (around 1970)
Commentary
Dedicated adapter that can increase the number of channels for multi-amp playback by combining with TA-4300F.
By adding one TAD-43F to the TA 4300 f, a 4-channel multi-amplifier configuration can be developed.
It is also possible to make a 5-channel multi-amplifier by adding another unit.
A TA 4300 f 4-channel adaptor is used for connection.
The circuit configuration and performance are equivalent to those of TA-4300F, and excellent characteristics are obtained by high-performance FET.
* The 4 channels described in this unit are 4 channels of multi-amplifier configuration, not for multi-channel playback.
Model Rating
Type | 4-channel adapter |
Circuit system | NF type filter |
Passband gain | -0.5 dB to -1.5 dB (through the high band of TA-4300F in the passband) |
Crossover frequency | 3k, 4.5k, 6k, 8k, 10k, 12 kHz |
Output impedance | 5k Ω or less (maximum at position between level under a control) |
Distortion factor | Pass band 1 V output : 0.03% 4 v output : 0.1 per cent Crossover frequency 1 v output : 0.05 per cent 2.5 V output : 0.1% |
Signal-to-noise ratio | 85 dB (1 v input, closed circuit) |
Maximum input level | 4.5 V (Distortion Factor 0.1%) |
Frequency characteristic | Fc ~ 100 kHz + 0 -1dB * fc is the high-range crossover frequency of TA-4300F |
Semiconductor used | 16 units (including 12 FETs) |
Pwer | Supplied from TA-4300F |
External dimensions | Width 100x Height 149x Depth 316 mm |
Weight | 1.85kg |
Attachment | Connection code RK-74x1 Connection code nameplate x2 |