SONY TAE-S1

Commentary

Stereo preamplifier of the Component Series.

In order to send a pure music signal to the power amplifier, we use a direct link that keeps the signal path between the audio board and the front panel as short as possible.

Equipped with a source direct switch that bypasses the tone control circuit, etc.

It uses a shaft drive in which the volume body and knob are connected by a long shaft gold-plated input / output terminal.

Wireless remote control is included.
This remote control not only controls the TAE-S1 itself, but also controls other Component Series units connected to the audio bus, such as Sony CD players and MD decks with wireless remote control.

Model Rating

Type	Stereo preamplifier
Input Sensitivity / Impedance	Phono MM : 2.5mV/50k Ω Line system : 150mV/50k Ω
Output Level / Impedance	Rec out : 1.5V/47 Ω Line system : 150mV/1k Ω Headset : 10 mW (8 Ω)
Total harmonic distortion factor	0.005%(1kHz)
Frequency characteristic	10 Hz ~ 100 kHz + 0 -3dB
Signal-to-noise ratio	Phono MM:85dB Line system : 105 dB
Tone control	Bass : ± 7 dB (100 Hz) Treble : ± 6 dB at 10 kHz
Accessory function	Source direct switch Remote Commander
Pwer	100 VAC, 50Hz/60Hz
Power consumption	10W
External dimensions	Width 310x Height 90x Depth 360 mm
Weight	Approx. 3.2 kg
Attachment	Wireless Remote Control RM-S1